AEM W/M Hose Kept Popping Out
#1
Evolved Member
Thread Starter
AEM W/M Hose Kept Popping Out
Hi Guys,
my AEM W/M hose connecting to the injector nozzle kept popping off recently and ive tried cleaning the small filter and everything inside the Nozzle but it could only last for few runs and its back to same.
Do anyone know what is the problem? Ive tried cut off the hose tip a little and its still doesnt hold.
Thanks
my AEM W/M hose connecting to the injector nozzle kept popping off recently and ive tried cleaning the small filter and everything inside the Nozzle but it could only last for few runs and its back to same.
Do anyone know what is the problem? Ive tried cut off the hose tip a little and its still doesnt hold.
Thanks
#3
Evolved Member
Thread Starter
Hi OkevolutionVIII, thanks for sharing and yes its confirmed the injector holder is the problem. Ive changed to another holder from my Synapse bov holder and the hose no longer pop off.
Thread
Thread Starter
Forum
Replies
Last Post
Ev0MR1cky
EvoM New Member / FAQs / EvoM Rules
1
Apr 13, 2010 01:57 PM
sharkm87
Evo Engine / Turbo / Drivetrain
12
May 12, 2007 06:56 PM
Lt. Boomstick
Evo Engine / Turbo / Drivetrain
14
Sep 14, 2006 08:43 AM