meDave's 4G Eclipse build
 

Haven't been active on the forum lately, but I was doing a lil work on the car so I thought I'd share a cpl pics.

http://i266.photobucket.com/albums/i...n/IMAG2301.jpg

http://i266.photobucket.com/albums/i...n/IMAG2304.jpg

http://i266.photobucket.com/albums/i...n/IMAG2306.jpg

http://i266.photobucket.com/albums/i...n/IMAG2313.jpg

http://i266.photobucket.com/albums/i...n/IMAG2310.jpg

http://i266.photobucket.com/albums/i...n/IMAG2320.jpg

http://i266.photobucket.com/albums/i...n/IMAG2318.jpg

The downpipe is 2.5' coming off the flange using a pie cutted 90 then v-banded to a 3" 90 bend. The midpipe is 3" all the way back to the cat with another v-band there. After the flexpipe it will reduce back to 2.5" where it will mate up to my custom 2.5' catback with dual outlets. I put another v-band at the axle just before my y-pipe, so in the future I will take the 3' piping all the way back.

As of now everything is just tacked together we'll seal it all up once done with the fitting.

Good stuff man

it's about time...nice manifold, lol

Looooooking goooooood

those that manifold fits our lancer ralliart 4g69 too???? if it does give me the link cause im looking for one...

The manifold fits, but not with the turbo. You'll have to make or get an adapter to angle it more down under the manifold and less in front of it. OR get a half size radiator.

ok thats perfect then...i was planning on installing a honda radiator so that's fine with me... for the condenser you just need to buy a universal 10 inch fan and put it on the front part...i already did this and works fine...

Link for manifold!

I have an old thread over @ Club4G that I posted the link for the place that made/sold them, but it is gone now. Not the thread, but the place that sold them it seems they are no longer in business. :confused:

I noticed that too, and the ebay store that was selling them is no longer listing them...manolo was asking about it in the other thread...

let see what if i can find a custom one, if not going with the road race and if there is enough people let's do a group buy at let see what we can get from that...

Hey Dave, I just found your thread aha, Its Shane btw, I see your car is coming along, thats great!, I remember when you first showed me the turbo, it was a long road ahead and now it seems like you are almost done.

Well... I have a few more pics to put up, so here we go.

http://i266.photobucket.com/albums/i...n/IMAG2359.jpg

http://i266.photobucket.com/albums/i...n/IMAG2515.jpg

http://i266.photobucket.com/albums/i...n/IMAG2517.jpg

http://i266.photobucket.com/albums/i...d/IMAG2514.jpg

http://i266.photobucket.com/albums/i...d/IMAG0299.jpg

http://i266.photobucket.com/albums/i...d/IMAG0297.jpg

http://i266.photobucket.com/albums/i...d/IMAG2509.jpg

http://i266.photobucket.com/albums/i...d/IMAG2518.jpg

http://i266.photobucket.com/albums/i...d/IMAG2519.jpg

It's in!!
http://i266.photobucket.com/albums/i...d/IMAG2520.jpg

Yeah, I know there are some steps missing, but once I got started that was it!

I got too busy putting this mother in to stop for pics. I still have some work to do. The placement of the upper O2's are too low, and I need to extend the wires. There was a slight error in measuring the exhaust, so now I have to shorten the midpipe a 1/2".
Dump pipe and IC piping still still need to be welded.

I should be starting the engine today to get the oil flowing, and check for leaks.

IC piping/dump pipe will be welded up next weekend.

That's it for now.

Very nice Dave , I was wondering when you would be making your way over here.

Keep it up and us posted {thumbup}

I did the same thing man, no worries...i think i commented on c4g but looking good...