-=Mr B=-

My ride has the basic stereo, and so, i went and bought a 10" android unit to replace it, complete with GPS, TPMS, cameras, handsfree for the phone, and so on... But, as it turns out, i wont be able to get anyone to tear my ride apart for a few months, and install it, and being a eBay unit, i have my doubts that they would honor DOA warranties at that point. So, i need to power this thing on. Which means i need a pinout for the powerconnector, with all the gizmos and gadjet connections. The audio stuff i found in the "How To" section, but i have been unable to figure out what pins do what, and since i cant measure on a powered stereo, i have a hard time guessing.
Supposedly it's the same pinout as for the EVOX with the basic stereo (not the Fosgate, or navigator one)

Anyone know where this could be found?

Thank you for your time and effort.

DWILSON357

iTrader: (1)

I found 5 diagram by googling "Ralliart Radio Pinout" Are you looking for a basic pinout?

https://cimg9.ibsrv.net/gimg/www.evo...27b6585656.jpg


https://www.evolutionm.net/forums/at...vo_ssl_amp.png

-=Mr B=-

Yeah, i need pretty much just thee basic pinout. But neither of those add's up to the pins i have on the adapter cable. The second one at least has the right amount of pins, but the pinout is wrong.
I have pin 5-6 right next to 1-4, and then don't have any pins where the pinout has 5 & 6. I also miss pin 10, but the pin they don't have, between 11 & 12, i do have. So, the right amount of pins, just not in the right places.

DWILSON357

iTrader: (1)

Ok, You are in sweden correct? Most of us have USDM Cars. You may be waiting a bit for someone with more experience.
So did you buy an adapter harness?
If not start there, it makes life alot easier!!!
But absed on what your saying it seems like you do have on its hard to tell.
Post a pic of the Car plug, the adapter and the radio plug.

-=Mr B=-

I have (well, supposedly) the adapter harness. It came with the stereo-unit.
The car, as i said above, isn't getting torn apart for a couple of months yet.
I sort of expected the documentation for the stereo unit to be... lacking, and sure enough, it is. Or i would just have gone with the pinout of it.