runnybunny

Thanks guys.

And yes, it's not worth it to me to mess with things for 20hp over stock, but I think I'll try the mig tip trick since I have lots of those. They also have a 5mm hole so should be good.

c08

Would there be any point/value in doing the SST teach-in procedure after loading these maps? I hadn't really heard much about doing it after a tune but in a video from MRT I was watching recently they mentioned it (video is facebook.com/MRTperformance/videos/10156508852758709/ they mention it around 4:30).

markfromNZ

For what it's worth - the stock pill reflash makes the car what it should have been to start with - you'd never pick it for a modified car, just a really healthy stock one, and in my experience at least improved mileage noticably. While peak power doesn't jump heaps the midrange and part throttle pull of the car are massively improved

Adding in the boost pill only really makes a difference to full throttle antics - I just used a mig welding 0.8mm tip and it gave a perfect result on the gst base map (22-23psi peak to a 18-19psi taper up top) - only mods to mine are test pipe, muffler delete and panel filter and the thing is startlingly rapid for what looks like a normal little hatchback

bjacoby00

Recently just purchased a Tactrix OpenPort 2.0 and am wanted to flash these GST basemaps but I am having trouble finding ROM defintion files due to goldenevo's website being no longer available. Can someone point me in the right direction?

RazorLab

iTrader: (8)

Here you go: http://norcalmotorsports.org/users/b.../ROMs/XML/Evo/

richardjh

Also

Golden Evo Undead


Rich

robban87

Just flashed V3.1 Stockpill onto my -10 Ralliart Sportback that has 80k km on it. Works like a charm! Only "issue" I had was that before the ECU had adjusted itself after the flash, boost spiked upwards to 22psi (1,5 bar) at WOT. I'm thinking this had something to do with the cold weather (6 degrees celcius), but after a while, after the ECU had adjusted itself, boost never went above 19 psi (1,3 bar). I can't thank you guys (Brian and Rich) enough for the incredible service you have done for the community!

AMS Boostpill is in the mail, can't wait to get that along with the boostpill rom and S-sport for the SST!

robban87

According to the S-sport flash guide that is published in the associated thread, you can never do it too often and some people on here would recommend to do it whenever you tune or increase the power of the engine.

SharkyPR

iTrader: (1)

Any new method for getting rid of DTC P0140 on a 2015 RA?

It started showing up after disabling rear O2 sensor.

I got a UR test pipe with O2 spacer.


**** NINJA EDIT: Found the settings. I thought I had to do the XML thing ****

Kaitos

So i've been seeing a lot of people talking about the XML files for using ECUflash, but it looks like the newest version comes with the XML files already in it (Just downloaded it and I saw they were there). Mine, for instance, would be the 59570004 file. I copied and pasted the one from Golden Evo Undead just in case, but I saw that there was already an XML file available in the /evo file of ECUflash with the number 59570004. Are there any differences to these files? (I have zero time to look through the thousands of lines of code for differences)

sachi

If i had the ams boostpill, TBE and aem intake on the 09 ralliart. and theres no rom for 98 which im in aus. can i use the 2010 ra rom and flash to the 09 ralliart?

richardjh

Hi. Yes, you should use the 2010 AUS/EDM one. It's fine.

2009 AUS/EDM ROM ID is 53610010.
2010 AUS/EDM ROM ID is 53610013.

As long as the first four digits are the same, ROMs are interchangeable.

Cheers,
Rich

sachi

hey rich! sorry to ask as i couldnt find the total kw/hp it makes, if all of those mods a put together in the stock ralliart. do you know how much kw/hp it makes over stock mods?

Michael Carrey

I have a 2015 RA. Do I use the 2013 flash?

strykr

I'm bring my car back to stock, and have a test pipe and K&N panel filter but am getting a P0420.

I was wondering what map to run to not throw this code because of the test pipe. I want to say use the tbe and switch the wgdc to the stock pill? But not sure so I'm asking, thanks!