Help:Egt 30_2050 and knock sensor for EVO_IX
Thread Starter
Newbie
Joined: Nov 2006
Posts: 1
Likes: 0
From: RUS
Help:Egt 30_2050 and knock sensor for EVO_IX
Hello.
I have 30-1320 EMS. Please help.
1. I use EGT aem--30-2050 one wire I connect on pin72_EGT2 another on a body. Wizard I choose all other. I include egt fuel control. I see EGT2 voltage=0 volts, adcr18=0. What do I do incorrectly?
2. Knock sensor it is connected pin91. Knokc control it is activated. I see on idle knock*1=0volts, adcr9=0. In Parameters error I see Error Knock*1=ON. Why a mistake?
3. If the engine works I see error flash=ON. It is normal?
Thanks.
I have 30-1320 EMS. Please help.
1. I use EGT aem--30-2050 one wire I connect on pin72_EGT2 another on a body. Wizard I choose all other. I include egt fuel control. I see EGT2 voltage=0 volts, adcr18=0. What do I do incorrectly?
2. Knock sensor it is connected pin91. Knokc control it is activated. I see on idle knock*1=0volts, adcr9=0. In Parameters error I see Error Knock*1=ON. Why a mistake?
3. If the engine works I see error flash=ON. It is normal?
Thanks.