|
Suffering from a severe case of Whiplash as result of Doug's car!
In case you need a definition
whip·lash Pronunciation: 'hwip-"lash n. 1: an injury to the neck resulting from rapid acceleration or deceleration So I went up to Boost Solutions and got a ride in Dougs car {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} Doug did three shifts and each one chirped the tires. It felt like he launcehed at 6000RPMs three times in a row :D 392WHP and 374TQ will give you an adrenline rush. Not bad for stock turbo :) Doug believes he can get more out stock turbo since he hasn't pushed car to it limits yet and he plans on bigger turbo. To be honest he doesn't need to introduce LAG from a bigger turbo since his car is pulling like crazy :) 400WHP with very little lag and 11 second car is what most people would be happy to have :D *Also Doug installed my cam gears based on what VISHNU told George which was to set it to -5. The problem was he was not told to retard the cam gears one tooth plus -5 for total -12.5 which is what VISHNU does. Not big deal now since my car was fixed and I now have 310WHP. Peace, Snoop |
no problem man just don't sue me for the whiplash. :cool: glad everyone last night enjoyed the rides and hope to see yall at commerce friday.
|
What mods are on your car Doug?
|
Originally Posted by snoop
Not big deal now since my car was fixed and I now have 310WHP.
Peace, Snoop |
Doug see you on Friday I do believe for some tuning and what not!! Also, I am down to go to Commerce as well. Let me know. thanks
Matt Oh....unless some people want to head up to Bristol instead???? Let me know. |
Originally Posted by Noize
Is Boost Solutions AWD dyno now up and running? Where did you hit 310whp?
261.8 (on DD) *1.18= 309WHP on the Dynojet. |
Ah.
|
Originally Posted by snoop
In case you need a definition
whip·lash Pronunciation: 'hwip-"lash n. 1: an injury to the neck resulting from rapid acceleration or deceleration So I went up to Boost Solutions and got a ride in Dougs car {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} {OMG} Doug did three shifts and each one chirped the tires. It felt like he launcehed at 6000RPMs three times in a row :D 392WHP and 374TQ will give you an adrenline rush. Not bad for stock turbo :) Doug believes he can get more out stock turbo since he hasn't pushed car to it limits yet and he plans on bigger turbo. To be honest he doesn't need to introduce LAG from a bigger turbo since his car is pulling like crazy :) 400WHP with very little lag and 11 second car is what most people would be happy to have :D *Also Doug installed my cam gears based on what VISHNU told George which was to set it to -5. The problem was he was not told to retard the cam gears one tooth plus -5 for total -12.5 which is what VISHNU does. Not big deal now since my car was fixed and I now have 310WHP. Peace, Snoop Also, I am glad that you posted the cam gear issue, so people should know about the cam gears... George |
Originally Posted by snoop
*Also Doug installed my cam gears based on what VISHNU told George which was to set it to -5. The problem was he was not told to retard the cam gears one tooth plus -5 for total -12.5 which is what VISHNU does. Not big deal now since my car was fixed and I now have 310WHP. Peace, Snoop shiv |
Originally Posted by shiv@vishnu
Were the cam gears lined up to the "0" mark or the tooth with the red dot on it as we recommend? Lined up to the red dot, the cam gears are set to -5.
shiv |
Snoop,
Congrats on your HP #. |
watching it hurt my neck ;)
|
Originally Posted by shiv@vishnu
Were the cam gears lined up to the "0" mark or the tooth with the red dot on it as we recommend? Lined up to the red dot, the cam gears are set to -5.
shiv Shiv , what is the reason to retard the cam gears that much? All topend? George |
Originally Posted by snoop
Fidanza Cam gears were used not VISHNU cam gears. When George called he was told -5 but wasn't infromed if it was not VISHNU cam gears how to set them up by retarding a tooth. No big deal since my cam gears are correct now and my car is running great :D
The only differences with our gears is that you align the gears themself to the cam cover marks with the red dot, not the zero mark. Shiv |
Originally Posted by shiv@vishnu
If you got Fidanza cam gears which were designed for an EVO, you want to retard them just 5 degrees, not 12.5. Same with ours gears.
The only differences with our gears is that you align the gears themself to the cam cover marks with the red dot, not the zero mark. Shiv OK that makes sense. |
| All times are GMT -7. The time now is 05:51 PM. |
© 2026 MH Sub I, LLC dba Internet Brands