11.738 @ 119.06 on Pump 94 octane
Hey can we get a pump gas dyno sheet? Where does it hit full boost, Torque, and horsepower? I am thinking about getting this turbo and been wanting to see these #'s on pump gas! Thx for any info Also who is this gt3076r kit from?
Last edited by PhoenixEvo; Sep 8, 2006 at 12:11 PM.
Thread Starter
Newbie
iTrader: (2)
Joined: Oct 2005
Posts: 77
Likes: 0
From: Pittsburgh/Washington PA
The kit I m using is the Slowboy Racing EVO VIII Turbo Kit. You have the option of using the GT3076r or GT3582r turbo, depending on what you want. If you go to there website, you will find my dyno chart. This chart was with the GT3076r kit, 264/272 HKS cams, and a apexi power fc standalone. Nate, who is the tuner at slowboy, was only able to tune with power commander because slowboy doesnt have power accel software like dave. Also slowboys dyno is a dynapack. I made 451whp and 390ft lbs. When I went to Buschur, I baselined at 312whp and 286ftlbs. Dave was able to gain 27 more whp and 16 more ft lbs. Plus it was a very hot and humid day in the norwalk OH. So my numbers might have been a little higher on a cooler day. If you would like to see Daves chart also let me know and ill post it for you. Here is the address with my chart http://www.slowboyracing.com/dynogra...451HafeKit.jpg. You can also go there website www.slowboyracing.com and read the info about their kit. It talks about the two pre-released kits. My friend mark who worked there had the same kit as me on his 05 MR. He made 407whp on pump(94octane)slowboys dynapack, and was tuned with only an AFC. He had stock cams.
Last edited by sti killer 187; Sep 8, 2006 at 04:33 PM.
Thread Starter
Newbie
iTrader: (2)
Joined: Oct 2005
Posts: 77
Likes: 0
From: Pittsburgh/Washington PA
Without cams full boost is ard 4200rpms. With 264/272 full boost is ard 4350-4400rpms. I was making power on Buschurs dyno, all the way to he shut the car down, which was at 7000rpms. Peak torque was reached at 5100rpms.
Last edited by sti killer 187; Sep 8, 2006 at 09:28 PM.
that is a solid trap for pump gas with that turbo. to give you an idea my other car has a t66 and on 16psi and 93 octain I trap 119...
work on that driving a 'little' and you'll have 11.5s. or you can just throw some 116 in there and crank it up
work on that driving a 'little' and you'll have 11.5s. or you can just throw some 116 in there and crank it up
Thread Starter
Newbie
iTrader: (2)
Joined: Oct 2005
Posts: 77
Likes: 0
From: Pittsburgh/Washington PA
Buschurs meth kit is going on soon, along with Daves coil on plug system. I have the power fc for sale right now cause im picking up an AEM EMS for real cheap brand new. So I hope to run 27-28lbs of boost. Maybe get 10's.
that seems like a lot of usable power, but the numbers due seem a little low like ANJ said and i would of expected 120's in the trap speeds as well, but im sure when its a little colder and such, ull get there
Originally Posted by sti killer 187
Well just wanted to thank Dave Buschur for the great tune with the power accel software. I ran steady 11 second runs last night. My best of the night with a 1.709 sixty foot was 11.738 @ 119.06 mph at 23lbs of boost on 94 octane. Def could get to mid 11's with a good sixty foot!!
Mike Huml
I have a 3076r flashed By Sean Ivey. I made 451whp and 379 tq with Home Depot alcohol. With a 2.4 sixty foot I ran 13.01@118mph. If I would have launched the car I would be good for high 11's with a 120+ mph. You should be able to do it with no problems.
Thread Starter
Newbie
iTrader: (2)
Joined: Oct 2005
Posts: 77
Likes: 0
From: Pittsburgh/Washington PA
Got a video clip from the night at the track. It wasnt my best run of the night, but it was still in the 11's. Somebody posted on a local racing page here in Pittsburgh. The first was my car. 1.73 sixty foot, 11.91 at 118.87mph. The next is evolunchbox. He ran a 10.80 at 135mph. I think the guy who took the video just put up the fastest run evolunchbox made, but it so happens i was before him. Here is the link....http://s100.photobucket.com/albums/m...t=100_2595.flv
Thread
Thread Starter
Forum
Replies
Last Post
David Buschur
Evo Engine / Turbo / Drivetrain
83
May 27, 2016 07:39 AM




