EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Drag Racing (https://www.evolutionm.net/forums/drag-racing-16/)
-   -   Ryu's HTA3582 9.75@143mph (Sponsored by MAP) (https://www.evolutionm.net/forums/drag-racing/658374-ryus-hta3582-9-75-143mph-sponsored-map.html)

RyuEvoIX May 19, 2013 06:29 PM

Ryu's HTA3582 9.75@143mph (Sponsored by MAP)
 
I'm back. {thumbup} Finally got the new setup to the track after catching back up with all of the big life changes and blessings my family has undergone. :) Today was certainly a hot one, 83degrees on the first pass and 89degrees ambient temps on the last pass, but I didn't let that stop me from hitting my goal of 9.6-9.7 and reaching at least 145mph on the HTA3582. All runs were done with full interior in the car along with my baby's car seat base strapped securely on the back seat. :lol: The car weighs 3020 lbs without driver.

My clutch at this point needs to be rebuilt as it would not go into gear unless I lift shifted. Half the day I experienced lockout.

VIDEO

9.75@143mph 1.42 60ft- http://www.youtube.com/watch?v=HLhlM...ature=youtu.be

9.88@145mph 1.57 60ft- http://www.youtube.com/watch?v=AF3Gb...ature=youtu.be

http://i1278.photobucket.com/albums/...ps6a5fa9da.jpg

http://i1278.photobucket.com/albums/...psb8c2a287.jpg

http://i1278.photobucket.com/albums/...ps6d208aab.jpg

http://i1278.photobucket.com/albums/...ps34516d9d.jpg

http://i1278.photobucket.com/albums/...ps0862f226.jpg

MAP 2.0L 10:0:1
MAP Stage 3 ported head
GSC s2 cams
Supertech dual valve springs/retainers
Skunk 2 intake manifold (Ported by Judge Racing)
Torque solutions thermal intake manifold gasket *thanks Mike*
Full blown 70mm tb
Mishimoto radiator
Spoolinup C.O.P.
ETS Vband exhaust manifold
ETS 4inch FMIC
FP Hta3582 w/.82 Tial hotside
FIC 2150cc injectors
Big B fab double pumper
Big B fab short route UICP
Custom o2 housing/downpipe
Ebay catback
Nesei LICP
M/T motorcycle slicks
Ryu tuned :cool:

Jetfixrguy May 19, 2013 06:36 PM

Congrats Chris! At least you don't need a driver to make all your cars fastest passes. You are one shiftin' mofo!

Cyloc May 19, 2013 07:01 PM

Way to go. Another goal for your car in the bag. Here comes the next one...lol

EvoDan2004 May 19, 2013 07:02 PM

holy moly. great job man.

RyuEvoIX May 19, 2013 07:58 PM

Thanks guys. I can't wait to see what an HTA86 in 60-70deg weather will do. :)

4G63Rules May 19, 2013 10:03 PM

Nicely done Chris! Wish I was able to attend!

ChrisCarey May 20, 2013 08:12 AM

Very nice sir, keep it up!

Evosick2332 May 20, 2013 08:14 AM

Congrats man!{thumbup}

RyuEvoIX May 20, 2013 08:22 AM


Originally Posted by ChrisCarey (Post 10814622)
Very nice sir, keep it up!

Will do sir. Ambient temps were just under 90degrees on the 9.7 pass. I lost 2mph from 10am to 1pm due to heat. When it gets cooler again watch out. Lol


Originally Posted by Evosick2332 (Post 10814624)
Congrats man!{thumbup}

Thanks! :)

bbyevo8u May 20, 2013 10:45 AM

awesome! was this car dyno tuned, what did it put down?

RyuEvoIX May 20, 2013 10:54 AM

I tuned it on the street. Virtual dyno results showed a best of 720's in high 60deg temps. It was around 90degrees at the track yesterday which yielded around 690's on the virtual dyno on dynojet setting.

ProccoEVO May 20, 2013 03:48 PM

awesome 60ft {thumbup}

Turbojunkie May 20, 2013 05:44 PM

Awsome times, and on a 3582 even. Great to see you back. I all ways look forward to your posts man. :D

RyuEvoIX May 20, 2013 05:54 PM


Originally Posted by ProccoEVO (Post 10815285)
awesome 60ft {thumbup}

Thanks. {thumbup}


Originally Posted by Turbojunkie (Post 10815433)
Awsome times, and on a 3582 even. Great to see you back. I all ways look forward to your posts man. :D

As always, I appreciate the support. :) You know me, I enjoy doing more with less. :lol:

4drboost May 20, 2013 06:11 PM

How much boost are you running?


All times are GMT -7. The time now is 06:51 PM.


© 2026 MH Sub I, LLC dba Internet Brands