STM Evo RS 8.0 @ 182 World Record Video!
 

Here it is!! The video we've all been waiting to see!

The World's Quickest and Fastest CT9A!

8.094 @ 182.53!!

Last year when we started building this car, we of course set out on a goal to be the best we could be, but to actually see the hard work of everyone involved pay off like this... no, not even everyone involved. Whether you had a hand on the car or not, everyone supporting us, as simple as liking a photo or sharing a video or buying a gasket, every shop out there helping us with parts and knowledge, and every fast car out there chasing the same records is all in on this!

We would also like to note, this car, though heavily modified, still retains so many standard bolt-on features and parts, like the STM Forward-Facing Manifold, STM 650 Cams, STM Staging Brake Kit, STM Drag Brakes, Lexan Kit, STM-Spec D2 Coilovers. Buschur Racing head, block, ignition and master cylinder delete. The intake manifold, exhaust manifold, transmission, clutch, driveshaft, motor mounts, suspension, brakes, fuel rail, throttle body, hood, trunk, doors, lip… These are all things any CT9A Evo can run. Still all wheel drive, still a standard body, front lip to JDM rear. Yes, it’s awesome to have bragging rights, but in the end, it’s all product testing. What parts work and where can we improve?

A very special thanks to David Buschur and John Shepherd, and thank you, everyone, for your support.

- The STM Team.




http://www.streettunedmotorsports.co...182_purple.jpg


http://www.streettunedmotorsports.co..._timeslips.jpg
Original High-Res Image


http://www.streettunedmotorsports.co...tm_rs_80_1.jpg

http://www.streettunedmotorsports.co...tm_rs_80_2.jpg

http://www.streettunedmotorsports.co...tm_rs_80_3.jpg

http://www.streettunedmotorsports.co...tm_rs_80_4.jpg

http://www.streettunedmotorsports.co...tm_rs_80_5.jpg

http://www.streettunedmotorsports.co...tm_rs_80_6.jpg

http://www.streettunedmotorsports.co...tm_rs_80_7.jpg

http://www.streettunedmotorsports.co...tm_rs_80_8.jpg

http://www.streettunedmotorsports.co...tm_rs_80_9.jpg

Congrats, wish you had a shop out in California!

So sexy

Congrats on the record and Beautiful car with lots of details. :mitsu:

I am surprised you are not running push lock fittings in place of all vacuum lines. Do you sell the FPR bracket?

Also if you dont already, maybe run a velocity stack into the compressor housing to break into the 7s..

Amazing job! You guys are awesome! and what a beautiful engine bay!
Glad you guys brought the record back home.

Congrats!!! Did you guys do anything different with the accessory belt this time around?

DAMN.. congrats, guess this platform is not dead afterall

Congrats!!! Amazing vid and pics too. Great job guys! I'll be sharing this everywhere.

Do you guys have a breakdown of the chasis build? I'm curious about suspension, weight reduction, etc.

{thumbup}:usflag:

Congratulations on this achievement, just when everyone thought it was all said and done already{thumbup}

Gtr like performance, for a 3rd of the price! Awesome.

Congrats! Nice to see the record back in the states and with a 5 speed no less. That is some serious ninja shifting!

The car looked like it was on skis for the first two passes. So much power...:eek:

Machineeeee 7s around the corner

That answers my question as to how much power until it gets wiggly even on rubber road. :}