Hey Guys. I'm new to the ECUFlash world.
 

Hi,
For sake of laziness, I'm gonna copy and paste my post from the OpenECU.org forums. I posted there, but I realized that this forum seems to be a lot more active than over there.

(Original Post)
I have a 2003 Mitsubishi Lancer OZ. I just got my OpenPort, ECUFlash, and EVOScan up and running today, and so I'm probably gonna be needing some help. [Edited Out Irrelevant Info]

I'll post my stock 91890014 2003 Lancer OZ Manual Transmission ROM, and today's driving logs below. I would appreciate it if someone could draw up a definition file for me, and possibly review my driving logs. The car has a factory tune (updated with catalytic converter recall reflash). Mods are CAI, RRM Headers, and Magnaflow Cat-back on regular 89 octane gas. RRM Lightened crank pulley, and Magnacore plug wires are enroute. I also noted that the logs seem to have picked up a good deal of knocksum... I can only assume that it is possibly phantom knock since I have a urethane filled front engine mount... however, I'll be filling up with 91 octane on my next gas stop to see if it goes away during a future logging session.

Thanks guys.

EDIT: I also noted that in the Evolution 8 forum, there is a guy requesting a definition file for the same ECU ID number. Is it normal for an Evo 8 and OZ-Rally to share the same ECU?

[End of Original Post]

For the purpose of getting the forementioned ROM and Log files, please get those from the original thread here: http://forums.openecu.org/viewtopic.php?t=2561