TPS to openloop
#1
TPS to openloop
I did a lot of logging today on my way home about a 15 mile trip. I noticed by looking at my logs, using pocketlogger,that it would switch to openloop at about 25.5% throttle.
I dont know if this will help anyone or not but I thought I would share.
I dont know if this will help anyone or not but I thought I would share.
#2
EvoM Guru
iTrader: (5)
Yep, although its a known fact, thanks for posting it.. Its actually about 30% that it goes in, its funny though because its different when you go by TPS Voltage, where it will say 60%, but nobody factors in that the TPS goes to 5v at about 3/4 throttle..
Good info..
According to Evoscan, Idle is about 15% (where a pocket logger would be 0%) and Open loop would be around 55% in Evoscan..
In ECUFlash it goes by TPS voltage...
Good info..
According to Evoscan, Idle is about 15% (where a pocket logger would be 0%) and Open loop would be around 55% in Evoscan..
In ECUFlash it goes by TPS voltage...