check this crap out
#1
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: australia
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
check this crap out
ok guys if u guys dont know my 4g64 build blew straight to hell about 6 months ago and blew my pistons apart. sussed everything and blamed it on fuel problems,boy was i wrong!! mate of mine was able to pull my map recently and this is what we found.....now, in this picture u see my timing map on the left and a normal timing map on the right both running on 98ron.....tell me what you think
#5
Evolving Member
Join Date: Dec 2005
Location: South Africa
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
who tuned that!!!?????
thats one hectic page of "i know **** about tuning"
Your tune looks lot better. I see you have big maps in the back ground? are you going over to that?
if you are, I would work on transition timing as well as actuals. if the transition is too big )3 or more degrees) then you can bring on knock.
try stay under 3. noticed it in the big maps 6-6500 and 7-7500 in the last 2 columns it is more.
Mike
thats one hectic page of "i know **** about tuning"
Your tune looks lot better. I see you have big maps in the back ground? are you going over to that?
if you are, I would work on transition timing as well as actuals. if the transition is too big )3 or more degrees) then you can bring on knock.
try stay under 3. noticed it in the big maps 6-6500 and 7-7500 in the last 2 columns it is more.
Mike
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
slipknot463
Evo Engine / Turbo / Drivetrain
19
Mar 20, 2006 12:56 PM