ECUFlash / Evoscan / Mitsulogger Questions
#1562
Silver Sponsor
iTrader: (-1)
EvoScan v2.9.0092 is now out to fix this.. press Check for Updates inside EvoScan under help.. this will correct the Load and RPM Axis showing correctly in the MapTracer.. Any problems, let me know.
Cheers,
Hamish.
#1563
This is new to me, I can't get EcuFlash to flash in a new Rom, I keep getting an error message of EcuFlash could not recognize this ROM image using any of the current definitions. Please Help!
#1564
after teamviewer your pc, I found there was:
multiple copies (x3) of your rommetadata xml folder, old versions of ecuflash and evoscan.
the actual fix was simple.. remove all the duplicate copies of rommetadata xml folders. install the latest clean verison of ecuflash with default XMLs
your ROM is 20030013 JDM Galant VR4.xml and it already comes default as part of the latest ecuflash.
I copied your kenneth mods xml into that file, and named it 20030013 JDM Galant VR4 Kenneth mods.xml
now you are all good to go! it works on both Ecuflash and Evoscan no problems at all.
Cheers,
Hamish.
multiple copies (x3) of your rommetadata xml folder, old versions of ecuflash and evoscan.
the actual fix was simple.. remove all the duplicate copies of rommetadata xml folders. install the latest clean verison of ecuflash with default XMLs
your ROM is 20030013 JDM Galant VR4.xml and it already comes default as part of the latest ecuflash.
I copied your kenneth mods xml into that file, and named it 20030013 JDM Galant VR4 Kenneth mods.xml
now you are all good to go! it works on both Ecuflash and Evoscan no problems at all.
Cheers,
Hamish.
#1565
Hey all, got my very first tactrix cable, ecuflash software and evoscan software. All up to date. But I can't seem to bring up the map / image that is currently on my ecu.
I've an 05 ausdm evo ix that was tuned by someone else, what I want to do is read the current tune and edit it to suit my new perrin intake. I've been doing a bit of reading about MAF scaling etc which seems to be pretty straight forward. Although I'm having trouble reading the current rom that is on the ECU.
When I read the ecu, it saves a .srf file. And it doesn't show any of the data (fuel, air, timing etc). I've tried changing the format to .bin and .hex but they all don't show any data on ecuflash.
How do I go about reading the ecu properly so I can edit the rom?
Thanks
I've an 05 ausdm evo ix that was tuned by someone else, what I want to do is read the current tune and edit it to suit my new perrin intake. I've been doing a bit of reading about MAF scaling etc which seems to be pretty straight forward. Although I'm having trouble reading the current rom that is on the ECU.
When I read the ecu, it saves a .srf file. And it doesn't show any of the data (fuel, air, timing etc). I've tried changing the format to .bin and .hex but they all don't show any data on ecuflash.
How do I go about reading the ecu properly so I can edit the rom?
Thanks
#1566
Can anyone help with a workable logcfg file for an JDM EVO7.
I cannot get my Tactrix OpenPort 2 to log directly to the sd card. All works great with Evoscan to a laptop.
Problem solved and it's working great. I named the logcfg file logcfg.txt.txt
I cannot get my Tactrix OpenPort 2 to log directly to the sd card. All works great with Evoscan to a laptop.
Problem solved and it's working great. I named the logcfg file logcfg.txt.txt
Last edited by Charlescrown; Jul 7, 2014 at 06:24 PM.
#1569
Silver Sponsor
iTrader: (-1)
Hey all, got my very first tactrix cable, ecuflash software and evoscan software. All up to date. But I can't seem to bring up the map / image that is currently on my ecu.
I've an 05 ausdm evo ix that was tuned by someone else, what I want to do is read the current tune and edit it to suit my new perrin intake. I've been doing a bit of reading about MAF scaling etc which seems to be pretty straight forward. Although I'm having trouble reading the current rom that is on the ECU.
When I read the ecu, it saves a .srf file. And it doesn't show any of the data (fuel, air, timing etc). I've tried changing the format to .bin and .hex but they all don't show any data on ecuflash.
How do I go about reading the ecu properly so I can edit the rom?
Thanks
I've an 05 ausdm evo ix that was tuned by someone else, what I want to do is read the current tune and edit it to suit my new perrin intake. I've been doing a bit of reading about MAF scaling etc which seems to be pretty straight forward. Although I'm having trouble reading the current rom that is on the ECU.
When I read the ecu, it saves a .srf file. And it doesn't show any of the data (fuel, air, timing etc). I've tried changing the format to .bin and .hex but they all don't show any data on ecuflash.
How do I go about reading the ecu properly so I can edit the rom?
Thanks
#1572
Yes!
Not sure what is Port C and how to see this data?
Do you mean data during logging in 3rd column "Reading"?
Thanks!
Do you mean data during logging in 3rd column "Reading"?
Thanks!
#1573
#1574