ECUFlash / Evoscan / Mitsulogger Questions
Aug 7, 2009, 12:24 AM
#631
Evolving Member
Join Date: Jul 2009
Location: Moscow, Russia
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
guys, I have probably a realy stupid question. Today I tried to open periphery bits in ecuflash and it doesnt show full number or area, how can I enlarge the area it shows ?
Aug 17, 2009, 09:38 AM
#636
Evolving Member
iTrader: (10)
Join Date: Oct 2008
Location: Hinsdale, nh
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys dumb question im new to logging so, I have Evoscan and an AEM UEGO, I want to log the a/f but not sure how to hook it up to my laptop...Stock ecu
Aug 19, 2009, 08:15 AM
#638
EvoScan not seeing COM port 12
I am using an Innovate LC-1 and trying to log over the serial out through a Keyspan USA-19HS. My computer is assigning COM port 12 and the software(logworks) from innovate can log from the device but I can't get EvoScan v2.6b to see COM port 12, it only can see COM ports 1-7.
One thing that does happen when I unplug the Keyspan device COM port 1 and 2 disappear. I have tried to log from both ports through Evoscan using the External Wideband A/F Ratio selection, but the function column has an x in it so of course I get 0 throughout the log.
I don't know if I am supplying enough information or not but I can't figure out why it won't log in evoscan.
Any help would be greatly appreciated. I did try to search maybe I wan't using the right criteria but I couldn't find anything on this issue.
One thing that does happen when I unplug the Keyspan device COM port 1 and 2 disappear. I have tried to log from both ports through Evoscan using the External Wideband A/F Ratio selection, but the function column has an x in it so of course I get 0 throughout the log.
I don't know if I am supplying enough information or not but I can't figure out why it won't log in evoscan.
Any help would be greatly appreciated. I did try to search maybe I wan't using the right criteria but I couldn't find anything on this issue.
Aug 19, 2009, 08:23 AM
#639
Evolved Member
iTrader: (7)
Join Date: Feb 2007
Location: MoTown,GA
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
mitsulogger ??
i can seem to find what im looking for. i searched a few different ways with no luck.
i just downloaded mitsulogger v1.6.... i got it to start and stop logging fine.
my question is how do i play it back? there is no playback button. no graph.
do i need another program to play it back? like dll? please help. thanks guys..
i just downloaded mitsulogger v1.6.... i got it to start and stop logging fine.
my question is how do i play it back? there is no playback button. no graph.
do i need another program to play it back? like dll? please help. thanks guys..
Aug 22, 2009, 03:23 PM
#640
Evolving Member
iTrader: (4)
Join Date: Jan 2007
Location: Phillipsburg, NJ
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
After searching, I got nothing so, should the 'clear dtc's' button turn my cel off for obd-II?
And if so, if it is not turning it off, can that have something to do with my cable? I'm not sure what cable I have (I know it's a 1.3, but not positive which version)
As I just learned today, the 1.3d is not capable of reflashing, which would make me think it also wouldn't be able to turn a CEL off
Also while I'm at it, I didn't search for this one, but is there a way to tell which cable I have without trying to write to the ecu?
edit: found a post by hamish and reread the descriptions of the cables on his site, so I know I have 1.3r or 1.3u, just not sure which one
Almost forgot, evoscan won't stay connected when I'm using obd-II (this is on a nt 2g dsm fwiw)
And if so, if it is not turning it off, can that have something to do with my cable? I'm not sure what cable I have (I know it's a 1.3, but not positive which version)
As I just learned today, the 1.3d is not capable of reflashing, which would make me think it also wouldn't be able to turn a CEL off
Also while I'm at it, I didn't search for this one, but is there a way to tell which cable I have without trying to write to the ecu?
edit: found a post by hamish and reread the descriptions of the cables on his site, so I know I have 1.3r or 1.3u, just not sure which one
Almost forgot, evoscan won't stay connected when I'm using obd-II (this is on a nt 2g dsm fwiw)
Last edited by cs82685; Aug 22, 2009 at 03:29 PM.
Aug 25, 2009, 08:42 AM
#642
Evolved Member
Join Date: Mar 2008
Location: Lattitude 48.38°, Longitude 17.58°, Altitude 146m = Slovakia, for common dude
Posts: 730
Likes: 0
Received 2 Likes
on
2 Posts
After searching, I got nothing so, should the 'clear dtc's' button turn my cel off for obd-II?
And if so, if it is not turning it off, can that have something to do with my cable? I'm not sure what cable I have (I know it's a 1.3, but not positive which version)
As I just learned today, the 1.3d is not capable of reflashing, which would make me think it also wouldn't be able to turn a CEL off
Also while I'm at it, I didn't search for this one, but is there a way to tell which cable I have without trying to write to the ecu?
edit: found a post by hamish and reread the descriptions of the cables on his site, so I know I have 1.3r or 1.3u, just not sure which one
Almost forgot, evoscan won't stay connected when I'm using obd-II (this is on a nt 2g dsm fwiw)
And if so, if it is not turning it off, can that have something to do with my cable? I'm not sure what cable I have (I know it's a 1.3, but not positive which version)
As I just learned today, the 1.3d is not capable of reflashing, which would make me think it also wouldn't be able to turn a CEL off
Also while I'm at it, I didn't search for this one, but is there a way to tell which cable I have without trying to write to the ecu?
edit: found a post by hamish and reread the descriptions of the cables on his site, so I know I have 1.3r or 1.3u, just not sure which one
Almost forgot, evoscan won't stay connected when I'm using obd-II (this is on a nt 2g dsm fwiw)
