OEM Style Gauges for EvoScan .99
#1
OEM Style Gauges for EvoScan .99
OEM Styled Gauges for EvoScan .99 (v.002)
Download Left Side
This file includes:
Speedometer (MPH + KM/h)
3-stage Speed Warning Indicator (80, 100, 110)
Tachometer
2-stage STi-styled Shift Light (6k, 7k)
AFR Display
AFR Indicator Lights for Open Loop Operation
Closed Loop Indicator
Download Right Side
This file includes:
Coolant Temp
TPS
Full Throttle Indicator (95% - 100%)
Boost (for JDM MAP)
Knock Count
3-stage Knock Indicator
Load
Timing Advance
Octane
Intake Air Temp
Injector Duty Cycle
Mapping Info:
Speedometer - Speed
Speed Warning Indicator - Speed
Tachometer - Engine RPM
Shift Light - Engine RPM
AFR Display - Wideband AFR (Wideband O2 sensor required)
AFR Indicator Lights - Wideband AFR (Wideband O2 sensor required)
Closed Loop Indicator - O2 Feedback Trim
Coolant Temp - Coolant Temp
TPS - Throttle Position
Full Throttle Indicator - Throttle Position
Boost - JDM MAP (Instructions Here)
Knock Count - Knock Sum
Knock Indicator - Knock Sum
Load - Calculated Load OR 2-Byte Load
Timing Advance - Timing Advance
Octane - Octane Level
Intake Air Temp - Air Temperature
Injector Duty Cycle - Must add IDC% formula to data.xml file (Formula found here)
Here is a layout file with values already assigned.
Instructions:
1. Download the left and right side XML files above using the right-click > Save As... method.
2. Save the files in your "EvoScan v0.99/GaugeTemplates" directory.
3. If you want to use the provided layout file, download the layout XML file to the "EvoScan v0.99/GaugeLayouts" directory.
3 a. To load the provided gauge layout, select "Gauges > Load / Display Gauge Layout" from the EvoScan menu and select the layout you've downloaded (i.e. oemGauges_002).
4. Open EvoScan.
5. From the top menu, select "Gauges > Add/Edit Gauge Widgets."
6. From the pulldown menu in the new window, select one of the new gauge files you've downloaded (i.e. OEMitsuGaugesLeft)
7. Assign the input values as noted above by right-clicking the image of the gauges.
8. If you would like to re-size the gauges, click and drag the lower-right corner of the window until they are the desired size.
9. When you are done, click the "Create New Widget" button at the bottom of the window.
10. You can move the gauges around by clicking and dragging the gauge window. you can also change assigned input values or close the gauge widget from the right-click menu.
11. To save the layout you've set up, including all of the mapped input values, select "Gauges > Save Current Gauge Layout" from the EvoScan menu.
Enjoy.
----------
Andenbre's Combined Versions:
OEM Style
eBay Blue
RalliArt White
Download Left Side
This file includes:
Speedometer (MPH + KM/h)
3-stage Speed Warning Indicator (80, 100, 110)
Tachometer
2-stage STi-styled Shift Light (6k, 7k)
AFR Display
AFR Indicator Lights for Open Loop Operation
Closed Loop Indicator
Download Right Side
This file includes:
Coolant Temp
TPS
Full Throttle Indicator (95% - 100%)
Boost (for JDM MAP)
Knock Count
3-stage Knock Indicator
Load
Timing Advance
Octane
Intake Air Temp
Injector Duty Cycle
Mapping Info:
Speedometer - Speed
Speed Warning Indicator - Speed
Tachometer - Engine RPM
Shift Light - Engine RPM
AFR Display - Wideband AFR (Wideband O2 sensor required)
AFR Indicator Lights - Wideband AFR (Wideband O2 sensor required)
Closed Loop Indicator - O2 Feedback Trim
Coolant Temp - Coolant Temp
TPS - Throttle Position
Full Throttle Indicator - Throttle Position
Boost - JDM MAP (Instructions Here)
Knock Count - Knock Sum
Knock Indicator - Knock Sum
Load - Calculated Load OR 2-Byte Load
Timing Advance - Timing Advance
Octane - Octane Level
Intake Air Temp - Air Temperature
Injector Duty Cycle - Must add IDC% formula to data.xml file (Formula found here)
Here is a layout file with values already assigned.
Instructions:
1. Download the left and right side XML files above using the right-click > Save As... method.
2. Save the files in your "EvoScan v0.99/GaugeTemplates" directory.
3. If you want to use the provided layout file, download the layout XML file to the "EvoScan v0.99/GaugeLayouts" directory.
3 a. To load the provided gauge layout, select "Gauges > Load / Display Gauge Layout" from the EvoScan menu and select the layout you've downloaded (i.e. oemGauges_002).
4. Open EvoScan.
5. From the top menu, select "Gauges > Add/Edit Gauge Widgets."
6. From the pulldown menu in the new window, select one of the new gauge files you've downloaded (i.e. OEMitsuGaugesLeft)
7. Assign the input values as noted above by right-clicking the image of the gauges.
8. If you would like to re-size the gauges, click and drag the lower-right corner of the window until they are the desired size.
9. When you are done, click the "Create New Widget" button at the bottom of the window.
10. You can move the gauges around by clicking and dragging the gauge window. you can also change assigned input values or close the gauge widget from the right-click menu.
11. To save the layout you've set up, including all of the mapped input values, select "Gauges > Save Current Gauge Layout" from the EvoScan menu.
Enjoy.
----------
Andenbre's Combined Versions:
OEM Style
eBay Blue
RalliArt White
Last edited by TouringBubble; Sep 18, 2007 at 07:10 AM. Reason: Added Andenbre links
#6
Evolved Member
iTrader: (16)
Join Date: May 2006
Location: Maine W/NJ Tags! FTP!!!
Posts: 1,229
Likes: 0
Received 0 Likes
on
0 Posts
I put the layout in the gauge layout folder and the left and right side into the gauge templates.. But it comes up as an error.. I tried swapping them into the opposite folders and got errors as well.. which goes where?
Is this cuz I still using 0.97?
Is this cuz I still using 0.97?
Trending Topics
#14
Registered User
Join Date: Jan 2005
Location: scarsdale,NY - lima,OH
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
I downloaded both templates and the layout but when I load the gauges only the left side would open.
Yes I do have v.99
Yes I do have v.99
Last edited by jdmevo8313; Apr 7, 2007 at 02:21 PM.