Peppe

I use Ecu Flash 1.30 to my EDM IX, everything works fine exept stationary rev limit, it is set to 2125 in ecu flash and 5000 in reality, even if i change it the stationary rev limit stays the same.. i have searched this forum for newer definitions with no luck what to do?

Thx Peter , Sweden

Pr3z

iTrader: (14)

The stationary cannot go below 4500 I think. At least thats how mine works.

TouringBubble

iTrader: (2)

I think the XML definition is incorrect. Maybe someone smarter than me can check it for you. Can you post your definition file?

Peppe

Probably, What definition file? i havn't changed anything in the program.

codgi

iTrader: (22)

ROM definition file. Open your rom and then check the Internal ID. That ID tells you which rom defintiion file you are using.

Then open your rommetadata folder and look for the xml file with the same internal ID. Thats your definition file.

wrx_ua

Same problem here...
ROM definition file 88840016

Peppe

here is the solution.

http://www.neufgiga.com/index.php?m=...4460c09f244227 Download that definition file


and then change this <table name="Stationary Rev Limit" address="274a" scaling="RPMStatLimit"/>


Works fine for me now