Jazzie604

iTrader: (1)

like $98. Where I work at a shop I knew that if I had a problem with it againg I could get it warrantied.


ps- it is only the factory replacement, not a 3 bar

bnice01

iTrader: (4)

good info

MRfabolous

iTrader: (17)

ok i am a newbie but can this be replaced with the factory unit with no modification if yes what is the bennefit to using this jdm map sensor thanks in advance

codgi

iTrader: (22)

The JDM map sensor replaces the stock ones with no physical modification (you'll need to flash special values for it to work though). Any other sensors you might need to do a bit of work.

In any case the main reason to switch to the JDM map sensor is that it allows you to accurately log boost. Mrfred also has another trick where you can directly control boost using it as well.

See

https://www.evolutionm.net/forums/sh...d.php?t=259595

and

https://www.evolutionm.net/forums/sh...d.php?t=293981

MRfabolous

iTrader: (17)

is this how you get rid of that maf sensor that the evo does have

MR Turco

iTrader: (16)

No this still requires the MAF sensor. There are many other soft changes that need to be made to run speed density on the stock ECU.