EVOSCAN 2.1 Maptracer Problems!
#18
Evolved Member
Thread Starter
iTrader: (15)
Join Date: Jan 2004
Location: "Tri-Cities" WA
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Evoscan got back to me on this problem. Below you will see what they posted on the ticket. So hopefully everything will be fine in 2.2.
"Thanks I'll take a look, and fix it for Evoscan v2.2 being released soon."
"Thanks I'll take a look, and fix it for Evoscan v2.2 being released soon."
#19
Evolved Member
iTrader: (32)
Join Date: Mar 2007
Location: CT
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
I am using evoscan 2.2 and the exact same thing is happening to me and I cant figure out why. Values will load in the bottom section of map tracer when i load my xml file but nothing will come up in the top grid no matter what i check off on the left. Can anyone help
#22
Evolved Member
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
I was having the same problem the other day with 2.5 but after messing around with it I figured out that you have to have loadcalc checked for the maptracer to work (even if you use MUT 2byte or 1byte load for tuning)
Note: I'm sure you all know this already...loadcalc needs to have AFRMAP and battery selected for it to work and they also have to be above it in the list.
Hope this solves it.
Note: I'm sure you all know this already...loadcalc needs to have AFRMAP and battery selected for it to work and they also have to be above it in the list.
Hope this solves it.
#24
Evolved Member
iTrader: (12)
Join Date: Aug 2008
Location: Minnesota
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
i have another little question, how come on my realtime logging graph, there is like from 0-3000 in 500 intervals going up the left side? i though the numbers were supposed to be smaller, i just downloaded it today so i dont really know anything about it
#25
Newbie
iTrader: (3)
Join Date: Jan 2009
Location: Warsaw - POLAND
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I was having the same problem the other day with 2.5 but after messing around with it I figured out that you have to have loadcalc checked for the maptracer to work (even if you use MUT 2byte or 1byte load for tuning)
Note: I'm sure you all know this already...loadcalc needs to have AFRMAP and battery selected for it to work and they also have to be above it in the list.
Hope this solves it.
Note: I'm sure you all know this already...loadcalc needs to have AFRMAP and battery selected for it to work and they also have to be above it in the list.
Hope this solves it.
#26
Evolved Member
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
evodziobak: you have to load your current XML and HEX/BIN file for it to show properly. Right click on anywhere in the bottom table and then select "load xml/hex file." Make sure you select the xml file associated with your romid and the hex file that is currently running on your ecu.
Hope that helps.
#27
Evolved Member
iTrader: (12)
Join Date: Aug 2008
Location: Minnesota
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
if i dont need to use real time logging i wont, i was just trying to see my knock, and with the huge intervals on the side i couldnt, you can kinda zoom in i think by dragging your mouse, but i'm not really sure what it does. it does zoom in to smaller numbers but then my knock graphs look weird, like it showed up as like 30, and i hope its not right lol
#29
EvoM Staff Alumni
iTrader: (16)
I posted this in the 2.6 thread but it might get answered here. Here is my problem:
I have to be doing something wrong. I for the life of me cannot get maptracer to work in 2.5 or 2.6 beta 7. I did notice in beta 7 the autoload is looking in an obscure folder for my .xml. I have one in there but it was like an old one that doesn't work. I replaced it with a working one and maptracer seems to load properly but when i click on parameters the top table displays nothing.
Is there a way to change where it looks to autoload the .xml? Am i doing something wrong?
I have to be doing something wrong. I for the life of me cannot get maptracer to work in 2.5 or 2.6 beta 7. I did notice in beta 7 the autoload is looking in an obscure folder for my .xml. I have one in there but it was like an old one that doesn't work. I replaced it with a working one and maptracer seems to load properly but when i click on parameters the top table displays nothing.
Is there a way to change where it looks to autoload the .xml? Am i doing something wrong?