ggevoIX

ok i'm having problems trying to get my stock rom.. ive tried a bunch of things.. i do have the unlocker on, cable works fine, unplugged and plugged the ecu back in and still getting this error..

[01:00:38.031] sending init sequence 1 (0001)
[01:00:39.062] got 0x05 response
[01:00:39.062] sending init sequence 2
[01:00:39.062] got 0x1B response
[01:00:39.078] sending init sequence 3
[01:00:39.484] entering bootloader
[01:00:39.500] sending kernel size (0)
[01:00:39.531] sending kernel load address (0xFFFF6000)
[01:00:39.562] uploading kernel
[01:00:39.562] verifying kernel checksum response
[01:00:39.562] kernel valid
[01:00:39.593] sending init sequence 2
[01:00:39.593] got 0x1C response
[01:00:39.593] sending init sequence 3
[01:00:40.015] entering bootloader
[01:00:40.046] kernel read area: addr: 03FFFA len: 0006
[01:00:40.156] kernel rsp page: 030000
[01:00:40.156] kernel read addr: 03FFFA len: 06
[01:00:40.156] kernel rsp end
[01:00:42.203] sending init sequence 1 (0001)
[01:00:45.468] sending init sequence 1 (0003)
[01:00:48.734] sending init sequence 1 (FFFF)
[01:00:52.000] sending init sequence 1 (F0F0)
[01:00:54.750] no response to any known code

tephra

iTrader: (6)

use ECUUnlocker from aktivematrix.com

ggevoIX

i do have the unlocker on!

also this car has never been tuned.. it only has 3,000miles on it... bought it from a guy that drove it for only 1,000miles.. he said he didnt do a damn thing to it..

tephra

iTrader: (6)

change ecuflash version?

ggevoIX

yeah i had the 1.34 version and all i got was:

01:00:42.203] sending init sequence 1 (0001)
[01:00:45.468] sending init sequence 1 (0003)
[01:00:48.734] sending init sequence 1 (FFFF)
[01:00:54.750] no response to any known code

so 1.29 got me alil farther!!!

tephra

iTrader: (6)

what cable do you have?

if its a new limitless one contact Hamish, apparently there are some problems with the new cables, pin3 or something needs to be removed!

ggevoIX

i'll have to ask my buddy.. i bought an extra one of his cuz he accidently bought two..

ive tried everything.. but i know the cable is working fine, cuz i have the car running and when i ask to read rom, car shuts off

tephra

iTrader: (6)

ok ill wait until you find out!

ggevoIX

but we tried the cable on my buddies evo first and it worked fine tho

tephra

iTrader: (6)

same model evo?

ggevoIX

yes sir ix

tephra

iTrader: (6)

both bought locally? ie ones not a JDM?

ggevoIX

both bought local

tephra

iTrader: (6)

so does his cable work on your car?

ggevoIX

he sold his cable.. but he tested my cable on his evo and it worked fine!!