casper03

Not sure if i can say this or not but here we go i had a 35r on my car and just changed to a stock 9 turbo... i have basic mods exhaust intercooler intake. I also have a mild cam like a 264 and 680 injectors does anyone have a rough tune i can get... my buddy has the program and the cable to put it in my ecu...

please help if you can and thanks!

casper03

Bump please help.....

scheides

iTrader: (10)

No one's posting because this is a BAD idea. there's no such thing as a 'base map' Log the car, read the 'how to tune an evo' thread that's stickied here. Make sure your boost is not too high, narrowband are a solid .90 or higher, and timing is not too high. If it knocks, add fuel (make the numbers in the map lower) and remove a tick or two of timing. If you were tuned for the 35r I'm guessing you'll prolly just have to touch up your tune a bit and call it good. If you see anything over 3 counts of knock, it's too much.

Ph3n1x

iTrader: (12)

There alot of tuners on the website. Pay for it.

casper03

i would not mind paying for it... give me asuggestion as to who to look to sort new here... sorry if i came across as free loader i jsut do not want to send ecu off ....

gsrboi80

iTrader: (38)

4WS@4WSTuning

Mellon

TTP

1320 Engineering

iTrader: (21)

www.4wstuning.com

C6C6CH3vo

iTrader: (9)

The ONLY way to tune the car for a change like that is with datalogs (AFR, knock, airflow and rpm required).

Tribal

iTrader: (39)

your in south carolina right...well if you want a good tune a decent price go to the fayetteville/ft bragg/hickory/POPE AFB/Raleigh thread we have an amazing tuner and we have a mustang dyno in fayetteville.

https://www.evolutionm.net/forums/so...leigh-989.html

C6C6CH3vo

iTrader: (9)

^^There you go^^

If near chas you can have Collin tune it for ya (showzone). I would tune it free (no dyno) if you already have an LC1 installed.

gsrboi80

iTrader: (38)

There you go man. Road tuning is the way to go