Evoscan Airflow Hz pegged??
#1
Evoscan Airflow Hz pegged??
When logging airflow (Hz) in Evoscan it rises like normal and then pegs at 1593.75 Hz all the way to the end of the pull. Any ideas on how to get it to read normally all the way through the pull? I'm guessing it has to be some sort of limit that I need to increase, but I'm not sure where to make this change.
#2
iTrader: (10)
What version of evoscan are you using?
EDIT:
step 1: search for "1593.75"
step 2: read...read some more? https://www.evolutionm.net/forums/5355426-post65.html
EDIT:
step 1: search for "1593.75"
step 2: read...read some more? https://www.evolutionm.net/forums/5355426-post65.html
Last edited by scheides; Feb 1, 2009 at 08:46 AM.
#3
What version of evoscan are you using?
EDIT:
step 1: search for "1593.75"
step 2: read...read some more? https://www.evolutionm.net/forums/5355426-post65.html
EDIT:
step 1: search for "1593.75"
step 2: read...read some more? https://www.evolutionm.net/forums/5355426-post65.html
#6
EvoM Guru
iTrader: (50)
The real airflow is the 2-byte airflow. The 1-byte airflow is a clipped version of the 2-byte airflow and has nothing to do with fueling. Mellon would be the most likely person to have maxed out the stock MAF, and even at 650 whp, it doesn't appear that he's maxed it out yet.
#7
Account Disabled
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
I'll have to remember to log airflow when I push it up to 700+awhp again...I'll probably pick up some race gas this week and finish the race gas tune this weekend if I have time.
Trending Topics
#8
I logged 2-byte yesterday and on a pretty much maxed 50-trim the max airflow reading I saw was ~2325Hz. I was looking for this data in another thread regarding the FP Red to calculate lb/min: https://www.evolutionm.net/forums/ev...gs-wanted.html
If anyone has airflow logs I would be interested in the data.
If anyone has airflow logs I would be interested in the data.