Gear-depending boost problem ?
Feb 1, 2009, 12:38 PM
#1
Evolving Member
Thread Starter
Join Date: Feb 2005
Location: Moscow, Russia
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Gear-depending boost problem ?
I try this mode on my 96530006 evo8. I want to divide 1-4 and 5 gears.
Rpm\mph for 4 gear equal 63.1, for 5 gear 44 for my gearbox. I set crossover to 53. At the pic. you can see logg where i adjust boost with GM solenoid with zeroed TBEC. It's 4-gear logg. Why my WGDC jump from #4 to #1 table anytime? It's only my problem or anybody saw this too?
My #2 and #3 tables equal to #1. May be problem in it? Thanks.
http://photofile.ru/users/aik_evo/135207694/
Rpm\mph for 4 gear equal 63.1, for 5 gear 44 for my gearbox. I set crossover to 53. At the pic. you can see logg where i adjust boost with GM solenoid with zeroed TBEC. It's 4-gear logg. Why my WGDC jump from #4 to #1 table anytime? It's only my problem or anybody saw this too?
My #2 and #3 tables equal to #1. May be problem in it? Thanks.
http://photofile.ru/users/aik_evo/135207694/
