88580014 AUDM - EDM Dual or single BCS?!?!?!
Feb 2, 2009, 01:37 PM
#1
Evolving Member
Thread Starter
Join Date: May 2008
Location: Rome
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
88580014 AUDM - EDM Dual or single BCS?!?!?!
Hi Guys!
I've a question.
On my EVO IX RS EDM I have a dual solenoid with 88580014.
I heard that somebody has with 88580014 only single solenoid (different market AUDM - EDM?)
I wish to know how many people have the single solenoid and how many dual solenoid.
This is the ECU:
Thanks, Giammarco
I've a question.
On my EVO IX RS EDM I have a dual solenoid with 88580014.
I heard that somebody has with 88580014 only single solenoid (different market AUDM - EDM?)
I wish to know how many people have the single solenoid and how many dual solenoid.
This is the ECU:
Thanks, Giammarco
Feb 2, 2009, 11:05 PM
#3
Evolving Member
Thread Starter
Join Date: May 2008
Location: Rome
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I have dual Boost Control Solenoid!!
I've an EVO IX RS EDM. So, why I have the dual solenoid? Would you please explain me why in Italty the EVO IX RS have dual BCS? Only IX GSR have single solenoid and the ID is 88840016.
I've an EVO IX RS EDM. So, why I have the dual solenoid? Would you please explain me why in Italty the EVO IX RS have dual BCS? Only IX GSR have single solenoid and the ID is 88840016.
Feb 3, 2009, 05:18 AM
#5
Evolving Member
Thread Starter
Join Date: May 2008
Location: Rome
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Have you checked if the two PINS 6 and 41 truly send the signal control?
Thanks Dave.
PS: perhaps the ID is 89980000? Not 88980000...
Thanks Dave.
PS: perhaps the ID is 89980000? Not 88980000...
Last edited by SkyNight; Feb 3, 2009 at 05:32 AM.
Feb 3, 2009, 06:06 AM
#6
Evolving Member
Thread Starter
Join Date: May 2008
Location: Rome
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Another question Dave.
I've also MAP sensor, intake temperature sensor and secondary air valve. Do you have it?
I've also MAP sensor, intake temperature sensor and secondary air valve. Do you have it?
Last edited by SkyNight; Feb 3, 2009 at 11:36 AM.
Trending Topics
Feb 19, 2009, 06:57 AM
#9
Feb 19, 2009, 01:11 PM
#10
Evolving Member
Thread Starter
Join Date: May 2008
Location: Rome
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
You can try to use this ROM 89980000 but seems that there are no fuel trims correction.
https://www.evolutionm.net/forums/ec...o-control.html
Have you an RS version Evoardo?
I think that after EVO VIII MR (JDM) the hw of RA ECU is different, so there are no fuel trims.
https://www.evolutionm.net/forums/ec...o-control.html
Have you an RS version Evoardo?
I think that after EVO VIII MR (JDM) the hw of RA ECU is different, so there are no fuel trims.
Feb 19, 2009, 09:12 PM
#11
You can try to use this ROM 89980000 but seems that there are no fuel trims correction.
https://www.evolutionm.net/forums/ec...o-control.html
Have you an RS version Evoardo?
I think that after EVO VIII MR (JDM) the hw of RA ECU is different, so there are no fuel trims.
https://www.evolutionm.net/forums/ec...o-control.html
Have you an RS version Evoardo?
I think that after EVO VIII MR (JDM) the hw of RA ECU is different, so there are no fuel trims.
Feb 20, 2009, 04:45 AM
#12
Evolving Member
Thread Starter
Join Date: May 2008
Location: Rome
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I think you have the same problem us mine! 
I've an EVO IX RS with 88580014 ("adapted ROM") and a full JDM spec.
I think that the RA ECU (RalliArt ECU) has a different hardware from stock ECU.
If you like we could carry on discussing in the other thread.
I've an EVO IX RS with 88580014 ("adapted ROM") and a full JDM spec.
I think that the RA ECU (RalliArt ECU) has a different hardware from stock ECU.
If you like we could carry on discussing in the other thread.
let's figure out what the deal is!
Thread
Thread Starter
Forum
Replies
Last Post
07EvoIX
General Engine Management / Tuning Forum
6
Feb 22, 2012 09:33 PM
acsian
ECU Flash
8
Dec 8, 2009 07:13 PM
