22 psi Boost setting for stock turbo
#1
Evolving Member
Thread Starter
Join Date: Nov 2006
Location: Northwest
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
22 psi Boost setting for stock turbo
i just installed a 3port GM Boost Selenoid, this is on a stock turbo VIII. i need to set the boost to 22psi as how it was set on my MBC, can you show me your boost setting for 22 psi that i can use to start with
TIA
TIA
#2
Evolving Member
Join Date: Mar 2006
Location: Europe
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
#4
Evolving Member
Join Date: Mar 2006
Location: Europe
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
As far as I remember there should be examples in there.
If not, there are other posts with examples... I don't remember exactely hich one.
Try with the search boost map
If not, there are other posts with examples... I don't remember exactely hich one.
Try with the search boost map
#5
Evolving Member
Thread Starter
Join Date: Nov 2006
Location: Northwest
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
someone post his wgdc settings on this post,
https://www.evolutionm.net/forums/ec...olenoid-3.html
try this one, but be carefull...
regards, Diddy
https://www.evolutionm.net/forums/ec...olenoid-3.html
try this one, but be carefull...
regards, Diddy
#6
Evolved Member
iTrader: (5)
Join Date: Jun 2007
Location: Lombard IL
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
This gave me about 21-22 PSi at around 70 degrees. The temperature has been raising hell and overboosting in the cold, though. The BCLO and MWGDC are pretty good. Keep in mind every car will be different, sometimes wildly so.
Thread
Thread Starter
Forum
Replies
Last Post
evo86
Evo Engine / Turbo / Drivetrain
39
Mar 24, 2014 11:50 PM