Help with scaling - FIC Bluemax 1450's
#77
Evolving Member
iTrader: (14)
Join Date: Aug 2005
Location: ND
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
With my 2.3l FP black and the FIC1450 E85, should these values change any from what is described here?
My Latencies are not close to what is posted here:
Scaling
1008 for e85
Latencies
2.784
2.112
1.680
1.344
1.176
0.984
0.816
Should my WOT AFRs change?
My Latencies are not close to what is posted here:
Scaling
1008 for e85
Latencies
2.784
2.112
1.680
1.344
1.176
0.984
0.816
Should my WOT AFRs change?
#79
Evolved Member
iTrader: (10)
Join Date: Dec 2006
Location: Chitown
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
I'm having some scaling & latencies issues for these injectors.
My settings
93 octane
1329-scaling
2.784
2.112
1.680
1.368
1.176
.984
.816
In order to check my low trims, I let the car run for a good 25 minutes and its around 6 which is fine with me. Here is the issue when I start driving the car to check the mid trims, after 10minutes the low trims go to 10 then to 12 but my mid trims are -4.
Is it an issue low trims go that high while driving?
If so, how can I adjust it?
Btw. I don't mean to hi-jack the thread , just think since I have the same injectors its the best to post it here.
Mods:
05' evo 8
walbro 255 pump
stock block/head
stock i/c
stock turbo
stock intake pipe
gsc stage 2 cams
excedy twin disk
aem widebankd
3" turbo back exhaust
FIC 1450cc injectors
I'm having some scaling & latencies issues for these injectors.
My settings
93 octane
1329-scaling
2.784
2.112
1.680
1.368
1.176
.984
.816
In order to check my low trims, I let the car run for a good 25 minutes and its around 6 which is fine with me. Here is the issue when I start driving the car to check the mid trims, after 10minutes the low trims go to 10 then to 12 but my mid trims are -4.
Is it an issue low trims go that high while driving?
If so, how can I adjust it?
Btw. I don't mean to hi-jack the thread , just think since I have the same injectors its the best to post it here.
Mods:
05' evo 8
walbro 255 pump
stock block/head
stock i/c
stock turbo
stock intake pipe
gsc stage 2 cams
excedy twin disk
aem widebankd
3" turbo back exhaust
FIC 1450cc injectors
Last edited by NOMIEZVR4; Sep 24, 2011 at 04:17 PM.
#82
Evolved Member
Thread Starter
iTrader: (62)
Join Date: Feb 2004
Location: Redmond - Lake Tapps ,WA
Posts: 3,336
Likes: 0
Received 6 Likes
on
6 Posts
Good to see this thread still going as others deal with scaling and tuning these beasts.
My car does run fine on pump gas though with these, although it only see it for 1 tank a year in the winter during storage.
My car does run fine on pump gas though with these, although it only see it for 1 tank a year in the winter during storage.
Thread
Thread Starter
Forum
Replies
Last Post
Raceghost
ECU Flash
22
Jun 1, 2016 12:30 AM
killerpenguin21
Evo Engine / Turbo / Drivetrain
13
Apr 7, 2012 04:49 PM