ISCV control system disassembly
#51
Evolved Member
iTrader: (2)
What addresses are you using for the 96940011 ROM? Are you just using the addresses I posted for 96530006? Or do you mean 96530006 as the 'stock 05 ROM' and you are comparing it to 88590015?
I don't think anyone posted addresses for 96940011.
Right...I would start with one or two tables like that, rather than copying everything over, since I wasn't sure on a few of them.
I don't think anyone posted addresses for 96940011.
Right...I would start with one or two tables like that, rather than copying everything over, since I wasn't sure on a few of them.
Last edited by l2r99gst; Jun 5, 2009 at 09:39 AM.
#53
Evolving Member
iTrader: (4)
Join Date: Apr 2008
Location: Germany
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Haven't found more, some routine are totaly different. And i understand nothing about the idle stuff. It will take some month until i can say more.
For 90550001:
--------------------
<table name="ISCV Demand Startup CTS Adder" category="Idle" address="4112" type="2D" level="2" scaling="ISCV_AX2_8">
<table name="Coolant Temp" address="50e6" type="Y Axis" elements="8" scaling="Temp"/>
</table>
<table name="ISCV Demand General CTS Subtractor" category="Idle" address="41d6" type="2D" level="2" scaling="ISCV_AX2_8">
<table name="Coolant Temp" address="50e6" type="Y Axis" elements="8" scaling="Temp"/>
</table>
<table name="Target Idle ISCV Trim Adjust Frequency" category="Idle" address="18c2" type="1D" level="2" scaling="Time"/>
<table name="ISCV Demand Below 500 RPM Idle Recovery Adder" category="Idle" address="1916" type="1D" level="2" scaling="ISCV_AX2_16"/>
<table name="ISCV Demand Target Idle Trim AC off" category="Idle" address="41ae" type="2D" level="2" scaling="ISCV_AX2_8">
<table name="Target Idle Deviation" address="4dc6" type="Y Axis" elements="9" scaling="RPMTarget"/>
</table>
<table name="ISCV Demand Target Idle Trim AC on" category="Idle" address="41be" type="2D" level="2" scaling="ISCV_AX2_8">
<table name="Target Idle Deviation" address="4dc6" type="Y Axis" elements="9" scaling="RPMTarget"/>
</table>
For 90550001:
--------------------
<table name="ISCV Demand Startup CTS Adder" category="Idle" address="4112" type="2D" level="2" scaling="ISCV_AX2_8">
<table name="Coolant Temp" address="50e6" type="Y Axis" elements="8" scaling="Temp"/>
</table>
<table name="ISCV Demand General CTS Subtractor" category="Idle" address="41d6" type="2D" level="2" scaling="ISCV_AX2_8">
<table name="Coolant Temp" address="50e6" type="Y Axis" elements="8" scaling="Temp"/>
</table>
<table name="Target Idle ISCV Trim Adjust Frequency" category="Idle" address="18c2" type="1D" level="2" scaling="Time"/>
<table name="ISCV Demand Below 500 RPM Idle Recovery Adder" category="Idle" address="1916" type="1D" level="2" scaling="ISCV_AX2_16"/>
<table name="ISCV Demand Target Idle Trim AC off" category="Idle" address="41ae" type="2D" level="2" scaling="ISCV_AX2_8">
<table name="Target Idle Deviation" address="4dc6" type="Y Axis" elements="9" scaling="RPMTarget"/>
</table>
<table name="ISCV Demand Target Idle Trim AC on" category="Idle" address="41be" type="2D" level="2" scaling="ISCV_AX2_8">
<table name="Target Idle Deviation" address="4dc6" type="Y Axis" elements="9" scaling="RPMTarget"/>
</table>
#55
Evolved Member
Join Date: Mar 2008
Location: Lattitude 48.38°, Longitude 17.58°, Altitude 146m = Slovakia, for common dude
Posts: 730
Likes: 0
Received 2 Likes
on
2 Posts
It seems MUT_08, MUT_0A are somehow connected with all this, either they say something like trend or balance or something like that.
Moreover Periphery0 & 0x10 choses between the two.
mrfred can you have a look?
Moreover Periphery0 & 0x10 choses between the two.
mrfred can you have a look?