Patch: Force OBD Inspection Pass (acamus, mrfred)
#346
EvoM Community Team Leader
iTrader: (60)
Anyone recomened a shop or someone who can install and load this program, I'm located about 45min North of San Fransico and I will pay well. I'm getting ready to have my car inspected from DMV then I need to get the car smoged. Im guessing you can plug a computer into the OBD2 and find out what codes needs to be patched?
#347
Well when it comes to computers I'm a complete idiot. All I can do to a computer is screw it up so I stay away from them. The car is 2004 RS, has Buschur V-band exhaust and Buschur FMIC with upper and lower intercooler pipes plus intake. The car does have FP4r cams, Supertech springs and ARP head studs and 9 BOV rest is stock.
#348
EvoM Community Team Leader
iTrader: (60)
Well when it comes to computers I'm a complete idiot. All I can do to a computer is screw it up so I stay away from them. The car is 2004 RS, has Buschur V-band exhaust and Buschur FMIC with upper and lower intercooler pipes plus intake. The car does have FP4r cams, Supertech springs and ARP head studs and 9 BOV rest is stock.
#349
Evolving Member
How are you guys generating patch tables applicable to specific ECU internal IDs? I have 96420008, but there is not a patch table coded for that internal ID.
This is the only part here that is tripping me up. The rest of the changes I'm not worried about. Thanks a bunch guys.
This is the only part here that is tripping me up. The rest of the changes I'm not worried about. Thanks a bunch guys.
#350
EvoM Guru
iTrader: (7)
How are you guys generating patch tables applicable to specific ECU internal IDs? I have 96420008, but there is not a patch table coded for that internal ID.
This is the only part here that is tripping me up. The rest of the changes I'm not worried about. Thanks a bunch guys.
This is the only part here that is tripping me up. The rest of the changes I'm not worried about. Thanks a bunch guys.
You will need to convert to a Tephra V7 ROM like 96530706 before you can patch the smog settings.
See here: https://www.evolutionm.net/forums/ec...ml#post7597337
Last edited by CDrinkH2O; Mar 1, 2015 at 12:11 PM. Reason: Added reference
#351
Evolving Member
You will need to convert to a Tephra V7 ROM like 96530706 before you can patch the smog settings.
See here: https://www.evolutionm.net/forums/ec...ml#post7597337
See here: https://www.evolutionm.net/forums/ec...ml#post7597337
#354
Evolving Member
#358
Newbie
iTrader: (4)
Join Date: Oct 2010
Location: In the River that Falls MA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Just to clarify on the 94170008 ROM you cannot just apply the patch you have to convert to tephra v7 then apply the patch? I did the patch step by step and I can control what's available or supported but cannot control weather they are in a ready state even the the tables are properly placed
I've read and read and searched any help would be appreciated
I've read and read and searched any help would be appreciated
#359
EvoM Guru
iTrader: (7)
Just to clarify on the 94170008 ROM you cannot just apply the patch you have to convert to tephra v7 then apply the patch? I did the patch step by step and I can control what's available or supported but cannot control weather they are in a ready state even the the tables are properly placed
I've read and read and searched any help would be appreciated
I've read and read and searched any help would be appreciated
Yes that is correct.
#360
Evolved Member
iTrader: (18)
I fail emissions today with an EVO9 on Speed Density 2.0 3D tune (88592715). I only had 3 monitors that were ready and all other came back as "unsupported"
I even plugged my scan tool into that evo9 that failed and also my personal evo 9 that is also on the 2.0 SD which verified that only 3 monitors were even available and set to pass.
Although the obd Force Passed tables are already implemented into that ROM/XML, no matter what options I choose, nothing changes on my Scan Tool.
I did experiment with another buddies NON 3D speed density patched rom (88590015) and that seems to be working perfectly fine after I patched the XML to display those tables. At this point I'm tempted to just make an emission only tune in order to pass, then switch back to the 3D Speed Density. Unless of course someone has any ideas...
I even plugged my scan tool into that evo9 that failed and also my personal evo 9 that is also on the 2.0 SD which verified that only 3 monitors were even available and set to pass.
Although the obd Force Passed tables are already implemented into that ROM/XML, no matter what options I choose, nothing changes on my Scan Tool.
I did experiment with another buddies NON 3D speed density patched rom (88590015) and that seems to be working perfectly fine after I patched the XML to display those tables. At this point I'm tempted to just make an emission only tune in order to pass, then switch back to the 3D Speed Density. Unless of course someone has any ideas...
Last edited by Klaiceps; Apr 27, 2015 at 07:48 AM.