When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is there a reason why you are trying to get all seven settings to show ready instead of just the ones that are supported by our cars?
No, I'm just trying to get it to pass. The settings I've tried give me three or seven. I can't find a combination that gives me just the correct ones.
Today I found the ECU is showing the EGR "not supported".
If the tables are the same address's it doesn't matter
when i change the upper set to what some people have posted here, some of the bottom ones change and vise versa.
and when they change, a couple of the hex codes change to ones that aren't even shown on any of the tables. it's f'ed up.
i've decided to put car back to stock and smog legit. i have all the sensors hooked up and the cat on the car anyway, so i don't even NEED to force pass anything. all i have to do is swap injectors and map sensor.
i only did it this way because it was supposed to be easier LOL.
it turns out my EGR was turned off @ bit 9. fixed. but now i have a p0403. it never ends LOL
my map and injectors were keeping me from putting in a stock ROM to pass smog. i figured i could make some changes to pass my current tune and be done. i was sorely mistaken.
but.. at least now the smog shop is seeing the EGR, that's a start. now i just gotta figure out why i have a code. everything is hooked up. i'm reading lot of people that replace the entire evap system and still get the p0403. it does not look promising LOL
passed. jesus.
turns out my EGR was turned off in periphery bit 9, so i fixed that. i then had a p0403 code, so then changed bit 15. finally passed. what a pain in the ***.
and why do i have so many availability and completion patches? i have no idea. here is my setting that passed today. i also have all sensors hooked up (i never remove them) with an OMNI map sensor and grimspeed boost solenoid.
and why do i have so many availability and completion patches? i have no idea.
I literally told you two times above but you chose to ignore me, among the other tips I posted. That's okay, I have now learned for the future not to try and help you with tech related questions.
I literally told you two times above but you chose to ignore me, among the other tips I posted. That's okay, I have now learned for the future not to try and help you with tech related questions.
Good luck with every thing!
To be honest, I don't understand the questions. I'm not very good at the more in-depth ecuflash stuff. I was busy and stressed, trying to get the car to pass, so I wasn't able to take the time to look into what you were saying. My apologies. The only part that made sense was "are you turning the EGR off?". That's what chucked for me, so thank you.
You left all the tests to on and passed Guess you missed the multiple posts saying not to do that
I honestly had no idea what I was doing, since my ROM didn't look like any of the others posted, for the most part. I was grasping at straws, trying to make SOMETHING work. It finally did, so that's a plus.
I set my top set of availability/completion settings to what people here used...didn't work.
So then I set the bottom ones to what people here used. Didn't work. My tuner sent me the ROM all his guys use. Didn't work. So, I was pretty much on my own.
Feb 10, 2016, 02:11 PM
Guess you missed the multiple posts saying not to do that 
