TephraMod V7
#3288
Last edited by Sascha; Jan 1, 2016 at 06:09 AM.
#3290
big map links?
Hi. Have the links to "big map translator" and "big map smoother" been broken or shut off. Clicking on them takes me to blank page at globalshare. Thought they sounded worth trying, but could just fill in maps manually I suppose. My thanks to everyone who shared their knowledge and experience. Exciting for an old dog to take his car skills to a new level. and to all!!!
#3291
Evolved Member
iTrader: (4)
hi. Have the links to "big map translator" and "big map smoother" been broken or shut off. Clicking on them takes me to blank page at globalshare. Thought they sounded worth trying, but could just fill in maps manually i suppose. My thanks to everyone who shared their knowledge and experience. Exciting for an old dog to take his car skills to a new level. and To all!!!
#3295
Newbie
iTrader: (10)
When switching over to tephra I get the car to crank over but it wont start! I've been searching around and all I see is people saying it's the immobilizer hex..
I've tried changing the value and the same problem persists. Here I have attached is the rom I currently have on the car and the tephra rom I'm trying to flash. What's wrong? It seems like I do have a immobilizer problem but I changed the values to match exactly like the current one.
I've tried both the evo ix tephra rom's and they both just crank over (v7+mods and speed density). I am trying to switch over to speed density. Also, I haven't yet changed the init code but I'm pretty sure I'm not supposed to touch that as I followed step 5 on https://www.evolutionm.net/forums/ev...hramod-v7.html
Edit:
I've downloaded ecuflash 1.44 and checked the immobilizer and it shows to be different. However, the version ecuflash (1.29a) I'm using only works with my cable (tactrix 1.3m) and the codes are the exact same. What do I do?
I've tried changing the value and the same problem persists. Here I have attached is the rom I currently have on the car and the tephra rom I'm trying to flash. What's wrong? It seems like I do have a immobilizer problem but I changed the values to match exactly like the current one.
I've tried both the evo ix tephra rom's and they both just crank over (v7+mods and speed density). I am trying to switch over to speed density. Also, I haven't yet changed the init code but I'm pretty sure I'm not supposed to touch that as I followed step 5 on https://www.evolutionm.net/forums/ev...hramod-v7.html
Edit:
I've downloaded ecuflash 1.44 and checked the immobilizer and it shows to be different. However, the version ecuflash (1.29a) I'm using only works with my cable (tactrix 1.3m) and the codes are the exact same. What do I do?
Last edited by essej; Jan 16, 2016 at 04:37 PM.
#3298
Evolved Member
iTrader: (2)
Can you try a non speed density rom to simply things? Make sure you don't need to alter some settings in the speed density rom if that is what you want to use. My car required 0x0058 for the immobilizer hex. And setting the immobilizer to 0x0000 will not work, I believe you have to go into the periphery bits to disable it.
Last edited by ronaldo9; Jan 17, 2016 at 12:11 PM.
#3299
Newbie
iTrader: (10)
Can you try a non speed density rom to simply things? Make sure you don't need to alter some settings in the speed density rom if that is what you want to use. My car required 0x0058 for the immobilizer hex. And setting the immobilizer to 0x0000 will not work, I believe you have to go into the periphery bits to disable it.
Last edited by essej; Jan 17, 2016 at 07:50 PM.
#3300
where is possible to download 9626 with tephra options for try if it works good in EDM evo8's?
I can only have a 9626 stock, but it could be great to check NLTS, CEL on Knock, drop boost on high knock, map switchin ect...
tks