TephraMod V7
#3424
Newbie
iTrader: (1)
Join Date: Dec 2011
Location: Germany, HAM
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
90556701 XML wanted
... I posted this in a thread "90556701 v7" as well...
Hello, I would like to convert to SD and this (90556701) prob is the best rom, now using tephra V7 90550701 or 90552701.
Where do I get the 90556701.xml?
Is it donate David?
Or is it "somewhere"?
Thanks for your help.
Cheers
Hello, I would like to convert to SD and this (90556701) prob is the best rom, now using tephra V7 90550701 or 90552701.
Where do I get the 90556701.xml?
Is it donate David?
Or is it "somewhere"?
Thanks for your help.
Cheers
#3428
05 evo 8 need help
Hi there I'm very new to this evo things .
so I have this 05 evo 8 looking to get tune or start tune I've read many formrum and I still confused of how the mods work so is there anyone can help me out on how the mod the Rom and use it the Data log and such.
I do my 2.0 openport
My English is not the good
Thanks
so I have this 05 evo 8 looking to get tune or start tune I've read many formrum and I still confused of how the mods work so is there anyone can help me out on how the mod the Rom and use it the Data log and such.
I do my 2.0 openport
My English is not the good
Thanks
#3429
Evolved Member
iTrader: (2)
I suggest you watch all 16 videos and read the link below.
https://www.evolutionm.net/forums/ec...-tune-evo.html
https://www.evolutionm.net/forums/ec...-tune-evo.html
Hi there I'm very new to this evo things .
so I have this 05 evo 8 looking to get tune or start tune I've read many formrum and I still confused of how the mods work so is there anyone can help me out on how the mod the Rom and use it the Data log and such.
I do my 2.0 openport
My English is not the good
Thanks
so I have this 05 evo 8 looking to get tune or start tune I've read many formrum and I still confused of how the mods work so is there anyone can help me out on how the mod the Rom and use it the Data log and such.
I do my 2.0 openport
My English is not the good
Thanks
#3431
Huge thanks to everyone that contributed to this, it's absolutely amazing!
I'm on the 96531706 rom, i'm just mindblown at how quick it is to get running, and it idles and drives incredibly smooth, even on out-of-the-box settings.
Had to do the minimum ipw mod to get reasonable pump-gas AFR's on ID2000's (and i think it'd be a great thing to add to the xml's standard), but it just WORKS!
Thank you!!
I'm on the 96531706 rom, i'm just mindblown at how quick it is to get running, and it idles and drives incredibly smooth, even on out-of-the-box settings.
Had to do the minimum ipw mod to get reasonable pump-gas AFR's on ID2000's (and i think it'd be a great thing to add to the xml's standard), but it just WORKS!
Thank you!!
#3433
Hi guys
I have sent a donation to tephra a while ago in regards to a rom that I'm looking for.
Rom I need is 88581713 for ADM Evo 9 With speed density.
Iv sent messages to tephra but his inbox is full. Does anyone have the above rom? Or can help me.
Kind regards
Jimmy
I have sent a donation to tephra a while ago in regards to a rom that I'm looking for.
Rom I need is 88581713 for ADM Evo 9 With speed density.
Iv sent messages to tephra but his inbox is full. Does anyone have the above rom? Or can help me.
Kind regards
Jimmy
#3434
First post has the 88591715 3d SD Rom that suits your car.
https://www.evolutionm.net/forums/ec...bles-baro.html
Last edited by seeaich; Sep 14, 2017 at 12:41 AM.
#3435
Evolved Member
iTrader: (12)
Hey guys Im in the process of a new build and curious if anyone could check out my rom ive been putting together.
A couple things to know. With the new build I had to get a new harness or the shop i had doing to work did anyway. The harness I ended up getting has no maf plug and I have no maf kicking around anyway in order to run car regularly.
So I need to run Speed Density to start off. I have the GM IAT sensor wired in to the maf wires. I am also running the Omni 4 bar MAP sensor.
Also had to find another ECU after the shop had already told me my original ecu was junk for what ever reason. They then went and got another ecu but were still not able to get car to start.
So I diagnosed the car with a friend after pulling it out of shop and came to a junk ecu again. Most likely because we found main grounds not connected by ECU and them cranking the car over constantly.
Now I just trying to make sure I have all the Speed Density settings correct along with the MAP sensor values which I am having a hard time locating actually.
Let me know what you guys think. I could start a new thread but just trying to get as many eyes on it as possible. Really like to hear this thing start sometime. lol.
A couple things to know. With the new build I had to get a new harness or the shop i had doing to work did anyway. The harness I ended up getting has no maf plug and I have no maf kicking around anyway in order to run car regularly.
So I need to run Speed Density to start off. I have the GM IAT sensor wired in to the maf wires. I am also running the Omni 4 bar MAP sensor.
Also had to find another ECU after the shop had already told me my original ecu was junk for what ever reason. They then went and got another ecu but were still not able to get car to start.
So I diagnosed the car with a friend after pulling it out of shop and came to a junk ecu again. Most likely because we found main grounds not connected by ECU and them cranking the car over constantly.
Now I just trying to make sure I have all the Speed Density settings correct along with the MAP sensor values which I am having a hard time locating actually.
Let me know what you guys think. I could start a new thread but just trying to get as many eyes on it as possible. Really like to hear this thing start sometime. lol.
Last edited by Evo8Emperor; Sep 16, 2017 at 12:42 PM.