Notices
ECU Flash

Tephra v7 Launch Maps Help

Old May 7, 2010, 03:40 AM
  #1  
Evolving Member
Thread Starter
 
widge's Avatar
 
Join Date: Mar 2010
Location: Australia
Posts: 478
Likes: 0
Received 1 Like on 1 Post
Tephra v7 Launch Maps Help

Hey Guys,

Ive done some reading and i converted to Tephra Maps today woot, car is running sweet less then 3 counts of knock through pulls which is awesome.

I tried using the Launch maps and read all day today and made my changes, well it didnt go to well the car is pulling way to much knock up to 20 counts!!!

Attached is my log of the Launch Maps.

Here is a pic of my launch maps

http://s619.photobucket.com/albums/t...HeapsKnock.png

Here is another pic of what i think may resolve the knock let me know what you think.

http://s619.photobucket.com/albums/t...eptrialFix.png

Until i get some feedback ive turned Launch Maps off!!

Thanks guys
Attached Files
File Type: zip
2step.zip (1.3 KB, 0 views)
Old May 7, 2010, 11:11 AM
  #2  
Newbie
 
speifer's Avatar
 
Join Date: Apr 2007
Location: H Town
Posts: 74
Likes: 0
Received 1 Like on 1 Post
What is your required TPS for launch map set at? If it is set high, at 70% for example, you will hit the stationary rev limitter on the normal map, then as you increase the throttle and hit 70%, you will suddenly jump to the launch map changing your timing from 30(ish) to -10 instantly. This will cause lots of knock.
Old May 8, 2010, 02:50 AM
  #3  
Evolving Member
Thread Starter
 
widge's Avatar
 
Join Date: Mar 2010
Location: Australia
Posts: 478
Likes: 0
Received 1 Like on 1 Post
its set at the stock tephra value of 40%

Having another look the second maps i posted are a lot smoother in transition, i might see if i can log with the new maps

Also i might increase my stat rev limit to the same as my rev limit so what you posted above will never happen

And ill change my TPS value to say 60% so i have to have more then half throttle to enable the launch maps

Last edited by widge; May 8, 2010 at 02:53 AM.
Old May 8, 2010, 07:23 AM
  #4  
Newbie
 
sti.this's Avatar
 
Join Date: Mar 2009
Location: Maine
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
If your stat rev limiter is set to 5500, the ecu will interpolate from -10 and 31 deg timing with your map. Id smooth it out from 5500-6000, and maybe even carry it out to 6500 just to make sure.

Raising your stat rev limit to the normal rev limit will essentially just disable it, why bother? Id leave the TPS at 40, smooth out your launch map a bit more and try again.

What speifer is saying is that you dont want the car to be on the normal map when you start hitting your stat rev limit, then have it switch to your launch map. You want it to be on the launch map earlier (lower TPS threshold) so it is a smooth transition to your stat rev limit.
Old May 8, 2010, 01:41 PM
  #5  
Evolving Member
Thread Starter
 
widge's Avatar
 
Join Date: Mar 2010
Location: Australia
Posts: 478
Likes: 0
Received 1 Like on 1 Post
Ive moved the stat rev limit then there is no way the car is going to be jumping between maps, i give it another go during the week.

Thanks mate
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CBRE
Evo Dyno Tuning / Results
52
Feb 9, 2011 10:53 PM
xcelr8
Drag Racing
19
Jan 21, 2011 06:05 AM
widge
Evo Dyno Tuning / Results
10
Sep 11, 2010 09:11 PM
widge
ECU Flash
27
May 23, 2010 07:48 PM
evoNine
Evo Show / Shine
3
Aug 13, 2007 06:40 PM


Thread Tools
Search this Thread
Quick Reply: Tephra v7 Launch Maps Help



All times are GMT -7. The time now is 11:57 PM.