TephraXMOD V1
#769
I have the streetlite flywheel from ACT, which is lighter than stock (i believe) but not by much. I wanted more mass for drag anyway at the time.
I had a lot of P0300's before, like at least 1 a day, so i assumed it was my flywheel. But now with a new tune/tuner those seem to have gone away, so i am thinking it was actual misfires probably from running lean during cruise/idle.
So I am guessing the reason Tephra or people are hestitant to add a p0300 disable is it could be used for tuners to easily cover up actual problems. But might have to if lightweight flywheels really are that bad, who knows.
I had a lot of P0300's before, like at least 1 a day, so i assumed it was my flywheel. But now with a new tune/tuner those seem to have gone away, so i am thinking it was actual misfires probably from running lean during cruise/idle.
So I am guessing the reason Tephra or people are hestitant to add a p0300 disable is it could be used for tuners to easily cover up actual problems. But might have to if lightweight flywheels really are that bad, who knows.
#774
Evolved Member
iTrader: (9)
Join Date: Mar 2006
Location: CT
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Quick question on this please...
So- with Tephra7 for the IX, you need to enable the CEL flash.
With the X, do you not need to do that? Do I just specify low/high knock count values and the duration of the flash, and that's it? Or is there a value that needs to be changed to enable the CEL flash?
Thanks!
So- with Tephra7 for the IX, you need to enable the CEL flash.
With the X, do you not need to do that? Do I just specify low/high knock count values and the duration of the flash, and that's it? Or is there a value that needs to be changed to enable the CEL flash?
Thanks!
#775
Evolved Member
iTrader: (7)
Quick question on this please...
So- with Tephra7 for the IX, you need to enable the CEL flash.
With the X, do you not need to do that? Do I just specify low/high knock count values and the duration of the flash, and that's it? Or is there a value that needs to be changed to enable the CEL flash?
Thanks!
So- with Tephra7 for the IX, you need to enable the CEL flash.
With the X, do you not need to do that? Do I just specify low/high knock count values and the duration of the flash, and that's it? Or is there a value that needs to be changed to enable the CEL flash?
Thanks!
#777
Newbie
Join Date: Dec 2011
Location: In my back garden!
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Downloaded Tephra v1 52360118(jdm 5spd) put the XML in correct folder but all I can see in Ecuflash is the following tables, no fuel, ignition or mivec maps. Also the tables that do show have no values. Any help please?
#778
Evolved Member
iTrader: (1)
Join Date: Nov 2009
Location: Omaha, NE
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
In the log....
[17:15:24.635] Unable to find parent metadata 5236...
You need to get a 52360018.
http://goldenevo.com/evox_view.php?rom=24
[17:15:24.635] Unable to find parent metadata 5236...
You need to get a 52360018.
http://goldenevo.com/evox_view.php?rom=24
#779
Newbie
Join Date: Dec 2011
Location: In my back garden!
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
In the log....
[17:15:24.635] Unable to find parent metadata 5236...
You need to get a 52360018.
http://goldenevo.com/evox_view.php?rom=24
[17:15:24.635] Unable to find parent metadata 5236...
You need to get a 52360018.
http://goldenevo.com/evox_view.php?rom=24
#780
On behalf of me and my tuner here in Greece just donated to donations@globalshare.net 110USD to thank you and support your efforts. We have successfully used 2008 EDM SST - 53050109 rom on my EVO X GSR SST ! Alt maps activation is done via cruise control button. Keep up the good work guys and looking forward for the SST TCU hack :-) . Regards / Dimitrios