Denso 3 bar map sensor scaling help
#1
Denso 3 bar map sensor scaling help
Hi guys I have a Denso 3 bar map sensor installed and logging through ecu
Can some one give me the equation I need for evo scan for PSI
I Have the following data I have just taken, my atmospheric pressure is 1032 hpa or 14.96 psi
PSIg Volts Raw ADC
0 2.1 106
2 2.3 116
4 2.5 126
6 2.7 136
8 2.9 146
10 3.1 156
12 3.3 166
14 3.5 176
16 3.7 186
18 3.9 196
20 4.1 206
22 4.3 216
24 4.5 226
26 4.7 236
28 4.9 246
Also scaling and xml def for SD as I am going to convert to SD 96260009 as i can only find the GM,Omni extra
Can some one give me the equation I need for evo scan for PSI
I Have the following data I have just taken, my atmospheric pressure is 1032 hpa or 14.96 psi
PSIg Volts Raw ADC
0 2.1 106
2 2.3 116
4 2.5 126
6 2.7 136
8 2.9 146
10 3.1 156
12 3.3 166
14 3.5 176
16 3.7 186
18 3.9 196
20 4.1 206
22 4.3 216
24 4.5 226
26 4.7 236
28 4.9 246
Also scaling and xml def for SD as I am going to convert to SD 96260009 as i can only find the GM,Omni extra
Last edited by philr8; Oct 2, 2010 at 11:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
mrfred
ECU Flash
10
Aug 14, 2009 07:17 PM