Stop your Car Stalling from Clutch in!
#77
Evolving Member
iTrader: (21)
I tracked down the code with the help of a fellow member, here it is if anyone else runs into this and needs this! for 8859
<table name="Decel Fuel Cut Resume RPM" category="Fuel" address="3030" type="2D" scaling="RPM8">
<table name="Engine Temp" address="6fde" type="X Axis" elements="8" scaling="Temp" />
</table>
<scaling name="RPM8" units="RPM" toexpr="x*125/16" frexpr="x*16/125" format="%.0f" min="0" max="2000" inc="50" storagetype="uint8" endian="big" />
<table name="Decel Fuel Cut Resume RPM" category="Fuel" address="3030" type="2D" scaling="RPM8">
<table name="Engine Temp" address="6fde" type="X Axis" elements="8" scaling="Temp" />
</table>
<scaling name="RPM8" units="RPM" toexpr="x*125/16" frexpr="x*16/125" format="%.0f" min="0" max="2000" inc="50" storagetype="uint8" endian="big" />
The following users liked this post:
3gturbo (Sep 29, 2019)
#78
Newbie
help finding XML for evo5/6 25570000
hey guys, i have this issue, car likes to drop down to approx 600rpm then bounce back to the desired 850rpm idle when pushing clutch in when stopping after cruising.
i have tried using ISCV vs TPS tables and adjusting BISS, i have got it as good as i can, but i think i need the Adder table to completely fix it!
does anyone have the addresses for evo 5/6 25570000 rom? ceddymod MAF and SD do not have them defined...
thanks in advance!
i have tried using ISCV vs TPS tables and adjusting BISS, i have got it as good as i can, but i think i need the Adder table to completely fix it!
does anyone have the addresses for evo 5/6 25570000 rom? ceddymod MAF and SD do not have them defined...
thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post