can't connect to anything
Dec 10, 2010, 09:57 AM
#1
Newbie
Thread Starter
iTrader: (8)
Join Date: Dec 2010
Location: RI
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
can't connect to anything
I've sent two support tickets to evoscan and they haven't replied back to me...
The first time I used evoscan I was able to connect to my car fine, but EcuFlash wouldn't work. Now, neither one will connect to my car. This is what i'm getting from EcuFlash:
[13:58:39.420] sending init sequence 1 (0001)
[13:58:42.680] sending init sequence 1 (0003)
[13:58:45.940] sending init sequence 1 (FFFF)
[13:58:49.201] sending init sequence 1 (F0F0)
[13:58:51.946] no response to any known code
[13:58:51.946] interface close
I have tried driving my car around to charge the battery, and running jumper cables while trying to connect so its not a voltage problem. I tried using an older version of ecuflash (1.29a) and uninstalling/reinstalling the drivers. I also used ECU Unlocker with EcuFlash to no avail. When I plugged the cable into my laptop the window popped up saying it was installing the new drivers so i'm pretty sure the cable is fine...i'm all out of ideas.
The first time I used evoscan I was able to connect to my car fine, but EcuFlash wouldn't work. Now, neither one will connect to my car. This is what i'm getting from EcuFlash:
[13:58:39.420] sending init sequence 1 (0001)
[13:58:42.680] sending init sequence 1 (0003)
[13:58:45.940] sending init sequence 1 (FFFF)
[13:58:49.201] sending init sequence 1 (F0F0)
[13:58:51.946] no response to any known code
[13:58:51.946] interface close
I have tried driving my car around to charge the battery, and running jumper cables while trying to connect so its not a voltage problem. I tried using an older version of ecuflash (1.29a) and uninstalling/reinstalling the drivers. I also used ECU Unlocker with EcuFlash to no avail. When I plugged the cable into my laptop the window popped up saying it was installing the new drivers so i'm pretty sure the cable is fine...i'm all out of ideas.
Dec 11, 2010, 02:07 PM
#2
I've sent two support tickets to evoscan and they haven't replied back to me...
The first time I used evoscan I was able to connect to my car fine, but EcuFlash wouldn't work. Now, neither one will connect to my car. This is what i'm getting from EcuFlash:
[13:58:39.420] sending init sequence 1 (0001)
[13:58:42.680] sending init sequence 1 (0003)
[13:58:45.940] sending init sequence 1 (FFFF)
[13:58:49.201] sending init sequence 1 (F0F0)
[13:58:51.946] no response to any known code
[13:58:51.946] interface close
I have tried driving my car around to charge the battery, and running jumper cables while trying to connect so its not a voltage problem. I tried using an older version of ecuflash (1.29a) and uninstalling/reinstalling the drivers. I also used ECU Unlocker with EcuFlash to no avail. When I plugged the cable into my laptop the window popped up saying it was installing the new drivers so i'm pretty sure the cable is fine...i'm all out of ideas.
The first time I used evoscan I was able to connect to my car fine, but EcuFlash wouldn't work. Now, neither one will connect to my car. This is what i'm getting from EcuFlash:
[13:58:39.420] sending init sequence 1 (0001)
[13:58:42.680] sending init sequence 1 (0003)
[13:58:45.940] sending init sequence 1 (FFFF)
[13:58:49.201] sending init sequence 1 (F0F0)
[13:58:51.946] no response to any known code
[13:58:51.946] interface close
I have tried driving my car around to charge the battery, and running jumper cables while trying to connect so its not a voltage problem. I tried using an older version of ecuflash (1.29a) and uninstalling/reinstalling the drivers. I also used ECU Unlocker with EcuFlash to no avail. When I plugged the cable into my laptop the window popped up saying it was installing the new drivers so i'm pretty sure the cable is fine...i'm all out of ideas.
Thread
Thread Starter
Forum
Replies
Last Post
GrabbinGears
General Engine Management / Tuning Forum
2
Jul 7, 2016 02:19 PM
