evo 7 ecu with 96532706
#1
Newbie
Thread Starter
Join Date: Nov 2010
Location: Auckland, New Zealand
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
evo 7 ecu with 96532706
Hi guys,
I am running an evo 7 ecu with the 96532706 tephra rom patched by ziad. I am wanting to know if I can use Ecu based boost control using mrfred's guide found here:
https://www.evolutionm.net/forums/ec...t-control.html
Seeing as the 96532706 rom is for an evo 8, does this mean that I can just copy and paste the xml code required to run ecu based boost control? Or will the definitions be slightly off because it has been patched to run on an evo 7 ecu?
Any help would be appreciated, thanks in advance.
Martin.
I am running an evo 7 ecu with the 96532706 tephra rom patched by ziad. I am wanting to know if I can use Ecu based boost control using mrfred's guide found here:
https://www.evolutionm.net/forums/ec...t-control.html
Seeing as the 96532706 rom is for an evo 8, does this mean that I can just copy and paste the xml code required to run ecu based boost control? Or will the definitions be slightly off because it has been patched to run on an evo 7 ecu?
Any help would be appreciated, thanks in advance.
Martin.
#3
Newbie
Thread Starter
Join Date: Nov 2010
Location: Auckland, New Zealand
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
I will look at that option soon, I am also trying to set up ecu based boost control and I am not sure if you can do that on 90550001. Thanks
#5
Newbie
Thread Starter
Join Date: Nov 2010
Location: Auckland, New Zealand
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
#7
Evolved Member
Has someone actually inserted the code in 90550001 v7 for PSI based boost control? 9653 already has all the tables in it to run this, you only need to change the values where indicated in ECUflash.
90550001 v7 had load based gear dependent boost control, though you may have to change the RPM/gear ratios if your ECU has been converted to be used in MPH. KPH should be fine.
90550001 v7 had load based gear dependent boost control, though you may have to change the RPM/gear ratios if your ECU has been converted to be used in MPH. KPH should be fine.
Thread
Thread Starter
Forum
Replies
Last Post