Uncontrollably RICH
#16
Evolved Member
iTrader: (8)
Join Date: Nov 2010
Location: Georgia
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
the screenshot is from Tephra V7 rom
if you have the standart rom, table names are still the same, they shoud be located in category "Fuel"
if you have the standart rom, table names are still the same, they shoud be located in category "Fuel"
Last edited by stunt2; May 19, 2011 at 11:30 AM.
#19
Evolved Member
Thread Starter
iTrader: (9)
Join Date: Jan 2008
Location: Mass
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
I saved 4 different versions of my rom all with one change made to them to try and correct my problem. Yesterday i tried all 4 and none fixed my issue.
Things i tried are
-Periphery bit 4 to 0
-Bradley's latency for the 2150's
-Raised my injector scaling (I read on a thread on here to raise it if you are running to rich at idle)
I forget the last one as i am at work now on a different computer.
I am quite stuck. any other sugestions??????
Things i tried are
-Periphery bit 4 to 0
-Bradley's latency for the 2150's
-Raised my injector scaling (I read on a thread on here to raise it if you are running to rich at idle)
I forget the last one as i am at work now on a different computer.
I am quite stuck. any other sugestions??????
#24
Evolved Member
iTrader: (50)
97140015
Code:
<table name="Minimum IPW #1 SHLL2->NOP (0x4908 -> 0x0009)" category="Misc" address="26D2E" type="1D" scaling="Hex16"/> <table name="Minimum IPW #2 SHLL2->NOP (0x4908 -> 0x0009)" category="Misc" address="26D30" type="1D" scaling="Hex16"/> <table name="Minimum IPW #3 SHLL->NOP (0x4900 -> 0x0009)" category="Misc" address="26D32" type="1D" scaling="Hex16"/> <scaling name="IPW16:SHLL0" units="ms" toexpr="x*8/1000" frexpr="x*1000/8" format="%.3f" min="0" max="65" inc="0.008" storagetype="uint16" endian="big"/> <table name="Minimum IPW SHLL0" category="Misc" address="1502" type="1D" scaling="IPW16:SHLL0"/> --------------------------------------------------------------------------------