I cant log my lc1 help please!!!!
#1
Newbie
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: ohio
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
I cant log my lc1 help please!!!!
so i been trying to log my A/F with evoscan 2.8 and i cant seem to get it to work doesnt matters what i did ,she is still fighting me hardcore,any suggestion guy,may be im not computer junkie but i have try and try to change all the setting and comp ports still nothing,thanks guys.....
#5
Evolved Member
iTrader: (22)
+1... Make sure you are plugged into the OUT cable on your LC1 with your serial cable. Also do you have a serial port on your notebook, or are you using a USB to serial cable. If you are using a USB to serial cable make sure you have all your drivers downloaded. I ran into that problem when I changed out logging notebooks. One had XP the other Windows 7... when I couldn't get the drivers for the USB Drivers for the Windows 7 notebook I couldn't get Evo Scan to recognise my LC1 either.
#6
Newbie
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: ohio
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
yes i did connect the plug,and i did the newest drivers for it too,but im using the prolitic serial to usb addapter that i bought from evoscan webside ,they said it work best for it ,uhhhhhhh
Trending Topics
#8
Evolved Member
iTrader: (22)
Hmmmmm and you said that you have a steady red light... it's not flashing? If so I would check Innovates web forum or give em a call? If it had been a few years ago it could have been an evoscan glitch; I know I had a similar issue but that was back in like 07. As evolved as evoscan is now I am pretty sure it's not the problem. I don't know bro
Last edited by tiggeryellow1; May 26, 2011 at 07:31 AM. Reason: grammar
#11
Newbie
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: ohio
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
i checked all the grounding ,change all the ports plug it in the out plug,the gauge work great reading fine ,just cant get it to log so i can fine tune it ,,should i try with a different wideband at this point,thanks for all the help guy.....
Thread
Thread Starter
Forum
Replies
Last Post