ECU comparisons
#1
ECU comparisons
Hey guys,
On a local message board someone had asked about the pro's/con's of upgrading their ECMlink 1G DSM with an Evo 8 ECU and wanted to get some factual differences between a few ECU's all in one thread. I will update this thread as any info gets added.
These are the ECU's I would like to use for comparison. Processor speeds (frequency/MHz,etc...), any BUS info that makes a difference, inputs, outputs, logging speeds,etc...
90-94 ECMlink'd ECU
95-97 ECMlink'd ECU
98-99 Re-flashable DSM ECU
03-04 Evo 8 ECU
Chipset spec's
Pro's:
Opensource flexibility
Con's:
Software can be complicated for some users
Thanks guys!
-Jamie
(aka jack_of_trades)
(jack_of_trades)
AEM EMS for Evo 8/DSM
On a local message board someone had asked about the pro's/con's of upgrading their ECMlink 1G DSM with an Evo 8 ECU and wanted to get some factual differences between a few ECU's all in one thread. I will update this thread as any info gets added.
These are the ECU's I would like to use for comparison. Processor speeds (frequency/MHz,etc...), any BUS info that makes a difference, inputs, outputs, logging speeds,etc...
90-94 ECMlink'd ECU
95-97 ECMlink'd ECU
98-99 Re-flashable DSM ECU
03-04 Evo 8 ECU
Chipset spec's
- Maximum operating frequency: 40 MHz
- 32-bit internal architecture
Pro's:
Opensource flexibility
Con's:
Software can be complicated for some users
Thanks guys!
-Jamie
(aka jack_of_trades)
(jack_of_trades)
AEM EMS for Evo 8/DSM
Last edited by Dynotech Tuning; Jun 19, 2011 at 06:29 PM.