nonschlont

iTrader: (3)

Well,

Im really getting frustrated, again! I installed EvoScan 2.8, but doesnt have the 2011 stuff, so I have to find it, (hopefully some1 will post up the 2011 .xmls), and HOPE the the data .xml can be edited (2.6 wouldnt allow this)
(windows 7)

I also uninstalled ecuflash 1.42 and upgraded to 1.43, in an effort to get the 2.0 cable drivers... The drivers installed for both programs, unfortuneately, it will not log in evoscan, nor will it read/write in ecuflash w/ the 2.0 cable! my 1.3 cable has no issues w/ either program!


the errors Im getting in ecuflash are:


[22:51:11.174] J2534 error [ERR_TIMEOUT].

[22:51:11.174] unable to connect to vehicle interface


and in evoscan, it just keeps trying to initialize and is unable.


Not whats really weird is the ACD light were going nuts! all 3 light at the same time, then none, then 1, 2, and kept randomly flashing! Pull out the cable and stops! After I set evoscan to run as admin. it stopped flickering the acd lights. weird!


Things Ive tried to fix:

set evoscan to run as admin.
troubleshoot compatibility
disabled the usb selective suspend settings


any help on this would be great, thanks... lol

nonschlont

iTrader: (3)

this is on a new HP w/ windows 7. My other toshiba, managed to get the 2.0 drivers (and connect/flash) on windows vista...

Im not having the best of luk finding any solutions, so if any 1 could lend some assistance I would greatly appreciate it!!!

Thanks

nonschlont

iTrader: (3)

ugghh! nobody.... I uninstalled and reinstalled 2.8 to no avail...