boost cut limit
#1
Newbie
Thread Starter
Join Date: Mar 2010
Location: new zealand
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
boost cut limit
Im running a sd v7 rom, has a boost cut at 319 load how can i up that?
also if im running about 30 psi boost what figure do i have the 1 byte/2 byte setting on? 1.2? 1.3? 1.4?
help would be appreciated.
Making 400kw at wheels today on factory ecu yippie
also if im running about 30 psi boost what figure do i have the 1 byte/2 byte setting on? 1.2? 1.3? 1.4?
help would be appreciated.
Making 400kw at wheels today on factory ecu yippie
#4
Newbie
Thread Starter
Join Date: Mar 2010
Location: new zealand
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Change the setting for the 'fuel cut multiplier' so it doubles the fuel cut limit from 319 to 638. Then just set the 'fuel cut table x 2' or whatever it's called lol.
You can lower the SD 'MAP KPA vs. Load' table so the peak load you achieve is whatever you'd prefer.
You can lower the SD 'MAP KPA vs. Load' table so the peak load you achieve is whatever you'd prefer.
Already done that but that still doesnt allow me to change the boost cut load box under global boost settings... its the boost cut i dont want not the fuel cut.
still reads 319 but i know the other box u mention reads 638 and yes i had already selected table 2 .
?
Thread
Thread Starter
Forum
Replies
Last Post