Load 1byte falling under high load?
#1
Evolving Member
Thread Starter
iTrader: (54)
Join Date: Jan 2007
Location: Cincinnati Oh
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Load 1byte falling under high load?
I have been fighting a boost issue for some time now. Ive been running the tephra v7 ROM. 94170715. The car acts like the ignition system is weak under full boost but i've done some testing and know its not. Im still trying to figure out the issue so I figured Id ask here with some findings Ive had recently.
I noticed in my logs when the car starts to stutter that the load 1byte will sometimes fall to almost 0 when the 2byte load is up in the mid 200's. Has anyone every experienced this? I dont know if its a possible cause to my stutter under full boost or just a coincidence. Or does 1 byte have no affect and the car is only using 2 byte to adjust timing/fuel?
Unfortunately I recently deleted a bunch of logs because I didnt feel I was getting anywhere. So Im hoping someone can chime in with a similar experience or know whats wrong.
I noticed in my logs when the car starts to stutter that the load 1byte will sometimes fall to almost 0 when the 2byte load is up in the mid 200's. Has anyone every experienced this? I dont know if its a possible cause to my stutter under full boost or just a coincidence. Or does 1 byte have no affect and the car is only using 2 byte to adjust timing/fuel?
Unfortunately I recently deleted a bunch of logs because I didnt feel I was getting anywhere. So Im hoping someone can chime in with a similar experience or know whats wrong.
#3
Evolving Member
Thread Starter
iTrader: (54)
Join Date: Jan 2007
Location: Cincinnati Oh
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Could this difference between the two cause for a misfire/stutter when it happens?