evoscan

iTrader: (-1)

Does anyone know any threads that talk about EvoX ACD reprogramming or xmls for it?I'm pretty sure mmcflash can do it, but I want to find out for sure... does ecuflash do EvoX ACD reprogramming at all?

UPDATE: http://www.evoscan.com/technical-veh...d-abs-sawc-ecu

Does anyone have any photos of inside an EvoX ACD? Does it look the same as this Outlander one below?

Is it 512K rom size too?

https://www.evolutionm.net/forums/9722431-post35.html
MMCFlash Module 3 Read/Write
ACD Outlander XL
31036 1XG4E
8631A083
G1T32977 H 8130
SW VJF029
CPU MH8104F
Download 8631A083.bin (512K)

Robevo RS

iTrader: (16)

Try to pm Vgergo : https://www.evolutionm.net/forums/me...14-vgergo.html
I know the guy from hungary, he does tunes rally cars and serious race cars, there for if there is a solution and program for it he has it.

Rob

tephra

iTrader: (6)

yes EcuFlash does it.

no there aren't any xml's for it

yet

fostytou

iTrader: (15)

We posted some pictures and chip information in the other ACD tuning thread from my car.
https://www.evolutionm.net/forums/8284214-post286.html (and some other posts also)
As far as I know there hasn't been any development on it.

Golden

iTrader: (1)

Does EcuFlash read it with the current version, or do you need something special?

tephra

iTrader: (6)

you need to bench it...

Sabin doesn't want the details revealed at the moment

Golden

iTrader: (1)

Are you able to read the code that runs the display? I'd like to change that up.

evoscan

iTrader: (-1)

have you confirmed that ecuflash can write back to the ecu too? I am getting people buying mmcflash because they said its the only program that can write back to the EVoX ACD ecu. And many people are searching for ACD xmls for it at the moment.

do you know if ECuflash can write back to the ecu? if so, do you have to bench it? or can it be programmed via the OBDII CAN port?

evoscan

iTrader: (-1)

I posted the Outlander ACD bin 512k file above.. do you have a copy of the EvoX bin file too? and is it also 512k?

evoscan

iTrader: (-1)

well there were many people that didn't want the details of how to bench recover a EvoX ecu posted neither... but I posted up pictures and wiring diagrams.

Beeble

There is a Ralliart ACD ecu available for the X

It only works for the RS models though ... so not compatible with AYC.
It would be nice to compare and contrast the roms though

I would certainly fork out some $$$ for reprogramming for road racing with someone who knew what they were doing.

Robevo RS

iTrader: (16)

i have a GEMS ACD ECU and that is actually working right now in my car with AYC with 5 maps i can choose form ...
BUt i dont know tht will actually work with a stock Engine ECU. Probably yes, but i am not sure.

these are the specs
" The EVO ACD is a direct replacement for the factory unit making it a perfect option for group N rally series cars.

Fully customisable differential maps
Setup can be password protected
Wheel speed sensor diagnostics
Fits into standard EVO wiring
Uses all standard EVO sensors
Connects to GWv4 software for complete customisation

5 Modes of operation: Off, Gravel, Snow, Tarmac, Lock
Start, Handbrake, Footbrake, Accel, Deccel
regimes for each active mode
Serial data stream for dash display
Available for Mitsubishi EVO models 7-10


"

tephra

iTrader: (6)

actually I did...

evoscan

iTrader: (-1)

yep that was funny, Colby made a guide, it was accurate but was not quite simple enough for peopleto follow, so you made a guide, but people couldn't find it, I was getting lots of questions on it, including tuners telling me not to release the guide, so I made a guide too and posted it on my website

evoscan

iTrader: (-1)

I'll ask him why he doesn't want it released.