Readiness Monitors With Tephra V7
Dec 28, 2011, 07:13 PM
#1
Newbie
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Newark DE
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Readiness Monitors With Tephra V7
So I've read through this entire thread ( https://www.evolutionm.net/forums/ec...mrfred-16.html ) Which hasn't really helped me.
I'm getting ready to do emissions inspection in DE. All monitors on the car have to show up as "Ready."
I'm running Tephra Mod 7 with the OBD II Patches on my Evo IX, catless. Everything is set to 1 in the tables except for AC/heated cat/ secondary air, which are set to 0. I have plugged in a cheap OBD II scanner, and it says that only 3 systems are ready, which are the continuous systems. Why can't I get the "Non-Continuous" systems to say ready? (Cat, Egr Etc...?
I'm getting ready to do emissions inspection in DE. All monitors on the car have to show up as "Ready."
I'm running Tephra Mod 7 with the OBD II Patches on my Evo IX, catless. Everything is set to 1 in the tables except for AC/heated cat/ secondary air, which are set to 0. I have plugged in a cheap OBD II scanner, and it says that only 3 systems are ready, which are the continuous systems. Why can't I get the "Non-Continuous" systems to say ready? (Cat, Egr Etc...?
Dec 29, 2011, 02:59 PM
#2
Newbie
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Newark DE
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Can anybody confirm this?
The tables say that the systems should be available. But no non-continuous monitors show up when I scan the car. Does this patch not even work?
The tables say that the systems should be available. But no non-continuous monitors show up when I scan the car. Does this patch not even work?
Dec 29, 2011, 03:28 PM
#3
Newbie
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Newark DE
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
I have discovered that no matter what you do in these "OBD Inspection" tables, nothing on my car changes. I've changed everything around, and reflashed several times, and I still get 3 systems ready, and 0 Inc, every time.
Everybody in the thread swears up and down that this works.
Everybody in the thread swears up and down that this works.
Dec 30, 2011, 03:08 PM
#5
I have discovered that no matter what you do in these "OBD Inspection" tables, nothing on my car changes. I've changed everything around, and reflashed several times, and I still get 3 systems ready, and 0 Inc, every time.
Everybody in the thread swears up and down that this works.
Everybody in the thread swears up and down that this works.
-Jamie
Thread
Thread Starter
Forum
Replies
Last Post
Poondoggs
Evo X Engine Management / Tuning Forums
8
Jun 6, 2016 08:33 PM
