ecuflash/speed density help
#1
ecuflash/speed density help
Ok guys im about to rip my hair out trying to figure out this darn headache. My ecuflash wont open up my SD roms without missing info. I alredy searched and ya a lot of stuff comes up but with it being so late in the game idk which updates are the most current and if theu interfere with one another ive uninstalled ecuflash like 5-7 times trying different combinations of patches and updates... Can some one pls so i can get the correct files needed to open a SD tune in ecuflash for a evo 9 internal id is 88592715. Pls if possible show me all the needed files to operate smoothly
Last edited by DormantBeast; Jan 4, 2012 at 08:07 PM.
#2
Evolving Member
Join Date: Apr 2007
Location: Los Angeles, CA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
posted by phenom:
According to this, you are not currently running a speed density rom, hence no speed density tables will be displayed. You will need to go to the Live Map thread and download the appropriate xml file for your rom, or change to the 88593715 if you wish to run live map and speed density.
Alternatively, your tuner may have purposely changed the rom id from 88591715 to make it more difficult for you to open/adjust the rom.
9653X706
8859X715
Replace the X above with the number below:
0 = MAF
1 = Speed Density
2 = DMA (Live Map)
3 = DMA (Live Map) + Speed Density
8859X715
Replace the X above with the number below:
0 = MAF
1 = Speed Density
2 = DMA (Live Map)
3 = DMA (Live Map) + Speed Density
Alternatively, your tuner may have purposely changed the rom id from 88591715 to make it more difficult for you to open/adjust the rom.
#7
umm which xml? lol I added some to the xml file I added to ecuflash to read the tephra roms. I add them inside the xml with notepad. Im at work so dont have the files in front of me or I could be more specific. But Ive downloaded a lot of patches and updates but cant seem to get them to work with SD
Trending Topics
#10
ok it looks like I need to change the inherits from evo9base_20081101 to TephraMOD-88590715-v7... Ive been trying but cant seem to get that switched over anyone have an idea on how to do this? I seem to be able to get everything working fine on my laptop but my desktop isnt and ive copied my rommetadata folder from the working laptop to my desktop but that didnt work? ideas??
Last edited by DormantBeast; Jan 5, 2012 at 07:46 PM.
#12
Evolving Member
iTrader: (32)
Join Date: Sep 2008
Location: Southern California
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
So I've been having some issues switching to SD, my idles are off. cold start doesn't seem to get enough fuel so I have to hold the gas down a bit for it to warm up.
Anyone have a base map that will help me get my evo8 running, enough too drive it to a shop.
I don't think I set it up right or can I email my map to someone. To let me know what's wrong
Anyone have a base map that will help me get my evo8 running, enough too drive it to a shop.
I don't think I set it up right or can I email my map to someone. To let me know what's wrong
Thread
Thread Starter
Forum
Replies
Last Post
mitsevolution
Evo X Engine Management / Tuning Forums
10
Jun 7, 2011 07:28 PM
3d, density, ecu, ecuflash, evo, evolutionm, flash, interfere, ix, motorsports, somg, speed, speed density, tuning, upgrades