rthreev

Hi guys, just joined and I have a question for you. I am helping a buddy tune his evo 9 and today we have run into an issue. The rom we were using has been great until today. Its about 2 degrease outside and he is hitting some sort of cut at about 10psi of boost. No CEL just what seems to be a fuel cut. Evoscan says he's hitting 159% of load out of a max of 160% at the same time it cuts, so heres my question, Will a cat-less exhaust and good intake pipes cause this? What is the highest I can safely turn up the boost cut load to? Any other info would be of great help. Thanks in advance

-r3v

3K

iTrader: (9)

What rom are you using? A stock 9 rom should go to 300 load and stock fuel cut should be around 230 load.

Raptord

iTrader: (10)

You aren't logging the correct load value if max is 160. You should either set up 2-byte load or use 1byte load if you're using Tephra mod.

rthreev

Yep figured it out, bad plugs lol but you guys got me thinking, is ther a how to on how to use evoscan with a 2006 evo mr?