need help with ecuflash
#1
Newbie
Thread Starter
Join Date: Mar 2012
Location: Cyprus
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
need help with ecuflash
hi....
I have two problems with ecu flash and my tuning stay freeze.
First the pop up window with vehicle type is empty when trying to log ecu, by ecuflash.
Second I download the ecu image with other laptop but when i open the image with ecu flash some values 'I think' are not correct. Take a look on rpm and load engine values.
RPM: 395, 461, 2559.., 1364.., 2559...,1406..., 105, 0, 39,78,117,156,195,234,273.
LOAD: 41,43,47,50,53,56,59,62,66,69,72,74,78,80,204...,1 09...,204...,112...
ecu id: 96260007
I have two problems with ecu flash and my tuning stay freeze.
First the pop up window with vehicle type is empty when trying to log ecu, by ecuflash.
Second I download the ecu image with other laptop but when i open the image with ecu flash some values 'I think' are not correct. Take a look on rpm and load engine values.
RPM: 395, 461, 2559.., 1364.., 2559...,1406..., 105, 0, 39,78,117,156,195,234,273.
LOAD: 41,43,47,50,53,56,59,62,66,69,72,74,78,80,204...,1 09...,204...,112...
ecu id: 96260007
#2
Evolving Member
iTrader: (1)
I suggest you start by replacing your 96260007.xml with the xml on this page:
http://ecurom.googlecode.com/svn/tru...o/96260007.xml
I just gave it a go, and the fuel and timing maps' axes look good now.
http://ecurom.googlecode.com/svn/tru...o/96260007.xml
I just gave it a go, and the fuel and timing maps' axes look good now.
#5
Newbie
Thread Starter
Join Date: Mar 2012
Location: Cyprus
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#6
Evolved Member
Most likely you have put the new xml in the wrong directory, or the old xml exists somewhere else, change the file extension of the old xml to .txt
try out this xml just in case, but remember both points above.
try out this xml just in case, but remember both points above.
#7
Evolving Member
iTrader: (1)
Hmmm, that xml should have worked. I've attached an xml - just rename it from .txt to .xml and give it a go. It's the one I used.
Edit: I see a mistake in the xml - the "Wastgate Solenoid Activation RPM" address should be 1a68, not 1668.
Edit 2: Beaten to the punch haha!
Edit: I see a mistake in the xml - the "Wastgate Solenoid Activation RPM" address should be 1a68, not 1668.
Edit 2: Beaten to the punch haha!
Last edited by HyperDisorder; Mar 24, 2012 at 02:52 AM. Reason: Just because
Trending Topics
#11
Evolved Member
The xml you posted has some problems. Use the one I posted and you should be good to go. Make sure you delete all your old 9626007 xmls, even the ones in the metadata folder, as ECUflash will remembers the location of the old files.