New EVODROID7 EvoScan Android GPS/Logger/Reflashing CarPC Touchscreen Review
#573
I did NOT know this off the top of my head but I did USE it. About two minutes of using it to do a simple Google search came up with the following:
http://www.linkecu.com/forums/G4Forum/860897503
http://www.geekmapped.com/forums/showthread.php?t=2003
http://www.linkecu.com/forums/G4Forum/860897503
http://www.geekmapped.com/forums/showthread.php?t=2003
#575
Hamish, have you sent out confirmation emails to everyone or just for the orders you are about to ship? I still havent gotten one. Order #7949. Just wanted to make sure it didn't go into my spam or something.
#576
Been doing a little work with the PPC Designer. This is nowhere close to finished but I took the gauge design lilmaynard posted up and modified it a bit to work for me. My EvoDroid is going to be replacing my gauge cluster since my RPM gauge stopped working. I will be testing it a bit tomorrow to see how well the gauges pick up and see if I need to remove any gauges in order to see things better.
The gauge needles are in there when I load it up on the ED and there is a digital speedometer in the center of the RPM area.
Here is a pic...
The gauge needles are in there when I load it up on the ED and there is a digital speedometer in the center of the RPM area.
Here is a pic...
#577
Couple more things...
1. When I try to mess with the template switch buttons on both my design and the standard one on the EvoDroid, it gives me a runtime error. I even edited the template pointer to go to my template. Not sure what is up with that. To get my template to show up, I have to name it 800x480_Carbon1 before it will show.
2. I believe it was lilmaynard that reposted your pinout for the inputs on the DA cable. Can you tell us which is positive and which is ground for the ACC power input? Is it a 12v input?
Thanks again for all of your hard work Hamish! I know even with all your testing, it can't compare to tons of hands on the device and finding bugs. I know with video games they go through tons of testing but bugs always show up anyways.
1. When I try to mess with the template switch buttons on both my design and the standard one on the EvoDroid, it gives me a runtime error. I even edited the template pointer to go to my template. Not sure what is up with that. To get my template to show up, I have to name it 800x480_Carbon1 before it will show.
2. I believe it was lilmaynard that reposted your pinout for the inputs on the DA cable. Can you tell us which is positive and which is ground for the ACC power input? Is it a 12v input?
Thanks again for all of your hard work Hamish! I know even with all your testing, it can't compare to tons of hands on the device and finding bugs. I know with video games they go through tons of testing but bugs always show up anyways.
Last edited by hotrod; Jul 11, 2013 at 09:51 PM. Reason: addition
#578
Evolving Member
#579
Evolving Member
Join Date: Apr 2007
Location: Los Angeles, CA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Hey Hamish,
I seem to have an issue with the gps sensor on my evodroid. When I open maps, it cannot determine my location unless I enable the "locate by cellular/wifi" option. I have run the gps test app for upwards of 5 minutes, pinging up to5 satelites, but never determines my coordinates. Anyone else having this issue? Any advice as to a possible fix?
-Robert
I seem to have an issue with the gps sensor on my evodroid. When I open maps, it cannot determine my location unless I enable the "locate by cellular/wifi" option. I have run the gps test app for upwards of 5 minutes, pinging up to5 satelites, but never determines my coordinates. Anyone else having this issue? Any advice as to a possible fix?
-Robert
Trouble ticket also submitted. Prompt response would be appreciated!
#581
Newbie