I will pay you to fix my cold start issue. Fic 1150/8859
#19
bonehead move. somehow I saved one of my 8's rom as my original 9's, so 9653 got flashed by accident. It didnt like that much lol.
car no longer stalls or dies but is still off. Warms up full lean at times until I tap the gas, "tricking" it into closed loop.... I'll post a log tomorrow
LTFT for both is zero. after an hour of driving. Ill log volts as well to rule out wrong latencies
car no longer stalls or dies but is still off. Warms up full lean at times until I tap the gas, "tricking" it into closed loop.... I'll post a log tomorrow
LTFT for both is zero. after an hour of driving. Ill log volts as well to rule out wrong latencies
#20
Evolving Member
if your LTFT stay to zero, does at least your oxygen feedback show something ? if not and your oxygen sensor 1&2 seem to be working then your car must be running in open loop
if oxygen feedback seems to be working and doesnt have bad values, +-25% max I believe (maxing it should throw a CEL tough), someone may have messed up with your "closed loop - lt trim control" table
if oxygen feedback seems to be working and doesnt have bad values, +-25% max I believe (maxing it should throw a CEL tough), someone may have messed up with your "closed loop - lt trim control" table
Last edited by Kakihara; May 2, 2013 at 06:23 AM.
#25
thats what mine were
im gonna flash a "as close to stock" as possible 88590715 rom for my mods to see if that fixes it. stupid car.
one more thing - is TPS supposed to be at any certain percentage/unit for off throttle/idle? less than 10? 12? I know I messed with my TPS on my throttle body when I did my shaft seals.
im gonna flash a "as close to stock" as possible 88590715 rom for my mods to see if that fixes it. stupid car.
one more thing - is TPS supposed to be at any certain percentage/unit for off throttle/idle? less than 10? 12? I know I messed with my TPS on my throttle body when I did my shaft seals.
Last edited by prowakeskater; May 24, 2013 at 03:26 PM.
#29
Evolving Member
I have no idea how MAP tuning works, I don't have one on my EDM only MAF,
is it normal the MAP sensor values in your "ef this.bin" especially the scaling are completely different from the 88590715 original rom ? They are almost double.
is it normal the MAP sensor values in your "ef this.bin" especially the scaling are completely different from the 88590715 original rom ? They are almost double.
Thread
Thread Starter
Forum
Replies
Last Post
pennies_hatchie
Evo Engine / Turbo / Drivetrain
68
Mar 5, 2023 08:02 AM
Ian0611
Evo Engine / Turbo / Drivetrain
50
Jul 6, 2016 11:50 PM
Raceghost
ECU Flash
22
Jun 1, 2016 12:30 AM