HELP ASAP!can't Read/write to ECU. Error in ECU flash. Log provided
#1
Evolving Member
Thread Starter
Join Date: Mar 2009
Location: Lag All Day, Boost All Night
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
HELP ASAP!can't Read/write to ECU. Error in ECU flash. Log provided
Hey guys, I was trying to flash a slightly modified version of my current rom onto my evo x (Just changed one of the DTC Disables from enabled to disabled). The rom flashed successfully, and the log said interface close, however, the fan didn't turn off like it normally does when the interface closes. I tried reading the ECU and I get this:
[12:56:33.268] J2534 API Version: 04.04 [12:56:33.268] J2534 DLL Version: 1.00.3210 Nov 22 2010 23:18:50
[12:56:33.268] Device Firmware Version: 1.12.3688
[12:56:33.268] Device Serial Number: TAQ94cjV
[12:56:34.686] -- loading kernel --
[12:56:34.686] -- connecting to kernel --
[12:56:34.686] kernel get version
[12:56:35.108] ECU HW part number : 1860A979
[12:56:35.639] interface close
[12:56:35.670] interface close
I also tried re-flashing the ecu back to the old rom and it gave me the same problem. The Car won't start now either. Please help!!!
Am I going to have to bench the ECU?
[12:56:33.268] J2534 API Version: 04.04 [12:56:33.268] J2534 DLL Version: 1.00.3210 Nov 22 2010 23:18:50
[12:56:33.268] Device Firmware Version: 1.12.3688
[12:56:33.268] Device Serial Number: TAQ94cjV
[12:56:34.686] -- loading kernel --
[12:56:34.686] -- connecting to kernel --
[12:56:34.686] kernel get version
[12:56:35.108] ECU HW part number : 1860A979
[12:56:35.639] interface close
[12:56:35.670] interface close
I also tried re-flashing the ecu back to the old rom and it gave me the same problem. The Car won't start now either. Please help!!!
Am I going to have to bench the ECU?
Last edited by Grip Master; Feb 2, 2013 at 11:18 AM.
#3
Thread
Thread Starter
Forum
Replies
Last Post
MR Turco
ECU Flash
111
Nov 27, 2021 08:08 PM
BlackHawk_Tsi
Evo X Engine Management / Tuning Forums
0
Apr 20, 2015 04:25 PM